I'm planning on building a 43 with D60's.The axels come from a 70's F250.The 43 will be quite shorter than the F250.How can I rectify my steering arms on the knuckles to get my steering geometry sorted out(Ackerman principles)?
Steering geometry-after shortening (1 Viewer)
- Thread starter brayn
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I will assume springover or linked.
the easiest way to get your steering correct (if you are gonna worry about ackerman) is to use a behind the axle Tie Rod.
But mostly, I would not be overly concerned about ackermann..
the easiest way to get your steering correct (if you are gonna worry about ackerman) is to use a behind the axle Tie Rod.
But mostly, I would not be overly concerned about ackermann..
