- Joined
- Apr 4, 2006
- Threads
- 162
- Messages
- 4,044
- Location
- Hillsboro, OR
- Website
- www.cascadecruisers.com
Sorry for the hi-jack...
are you the guy with the brown cruiser in "Lengendary Landcruisers?"
Solid Rock and "Roll"
- Thread starter 2badfjs
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Sorry for the hi-jack...
are you the guy with the brown cruiser in "Lengendary Landcruisers?"
No Tippy is the name of the cruiser. The guy is in Canada, I cannot remember his name though.
I love that line.....the windshield frame got bent.....HE HE HE
It was a fun weekend... Until......
The trail was really light until we went down this lip. Sever, I got Jim's message, and I'll get the CB and stuff later.
I think you should tube it and make it a soft top! The wifie would LOVE that!!
The trail was really light until we went down this lip. Sever, I got Jim's message, and I'll get the CB and stuff later.
I think you should tube it and make it a soft top! The wifie would LOVE that!!
Here's some more pics of this weekend's fun! This one is my fav.....Jim's saying " Hmm.....I think thats a steep drop....eh it'll do!" Very nicely done on that one there!!
More fun
These are the only two that I have of the 'whoops'
How come there aren't any pics of my taco? ? ? 
- Thread starter
- #69
great pics jeff!
look what we did tonight
without a windshield it's hard to tell how close it is...but it looks pretty good.
used a car lift to push out the roof.
a hi-lift to pull the "b" pillar (no pic, trust me)
a hi-lift to push the "a" pillars top corner forward
and the hi-lift to pull out the bottom of the "a" pillar.
oh yeah, the air hammer really made a big difference along the windshield line
no to pound out the doors and re-hang them
look what we did tonight
without a windshield it's hard to tell how close it is...but it looks pretty good.
used a car lift to push out the roof.
a hi-lift to pull the "b" pillar (no pic, trust me)
a hi-lift to push the "a" pillars top corner forward
and the hi-lift to pull out the bottom of the "a" pillar.
oh yeah, the air hammer really made a big difference along the windshield line
no to pound out the doors and re-hang them
- Thread starter
- #70
two more 
the sticker took a beating but held up nicely
the sticker took a beating but held up nicely
did you use a vehicle lift to force the roof back up into shape?
- Thread starter
- #72
- Joined
- Apr 4, 2006
- Threads
- 162
- Messages
- 4,044
- Location
- Hillsboro, OR
- Website
- www.cascadecruisers.com
well done... looks mo' betta.
C'mon Jim post up pics of that new bumper.
Hint: Nothing!
Okay, the Solid Rock decal got scuffed
Jason Andrews
Modaholic
you think?
that's your bumper you see there
unfinished of course
Gappy you think he's joking right? Well he's not!
Dayum Jim! I knew I shoulda been there to babysit you and Syver
Good thing you slapped that bumper on or you might be dealing with a twisted/bent frame or leafs too.
Glad you are okay!
- Thread starter
- #76
got the doors on today (thanks max/rob)
windshield is in (for the most part)
check trans and t-case oil tomorrow, air back up the tires and DRIVE!!!!
thanks to red cruiser and uncle ben (rising sun good guy) for all your hard work today and driving around colorado.
i'll get pics tomorrow.
i almost forgot thyver, thanks for the help youv'e givin in getting the 60 back on the road.
you have been a big help!!!!
windshield is in (for the most part)
check trans and t-case oil tomorrow, air back up the tires and DRIVE!!!!
thanks to red cruiser and uncle ben (rising sun good guy) for all your hard work today and driving around colorado.
i'll get pics tomorrow.
i almost forgot
thyver, thanks for the help youv'e givin in getting the 60 back on the road.you have been a big help!!!!
Last edited:
Nice story and I am glad no one was hurt.
Back up and running is the way to be after a roll like that.
How'd the front bumper fair?
I am so down for front protection on my wagon.
john
Back up and running is the way to be after a roll like that.
How'd the front bumper fair?
I am so down for front protection on my wagon.
john
jim has pics of the bumper he'll post tonight
it only flexed a little but it did not bend at all.
