Sliders for an hdj81

[DivByZero]

I bumped this other thread on rock sliders a few days ago for a set I got for my RHD HZJ80:

Rock slider recommendations.

I originally wanted the iron pig skid plate but it wasn't available before I did the Rubicon last year. I ordered the slee in a hurry. 3 days on the Rubicon I never made contact that I know of with the slee belly plate. Similar to my sliders I wanted the deltas but they were not ready so I...

forum.ih8mud.com

They fit any RHD model as I understand it.

 

[80t0ylc]

@Dusten IMHO, WKOR is your best choice. Also, sliders should have at least 3 mounts per side to have the strength needed and for longevity. Shorter wheelbase may be able to get away with 2, but our 80's are relatively long wheelbase. WKOR has the options and the experience.

 

[Bill Galey]

Okay, I was a bit tardy in getting back to this thr

Post a picture please, I have a RHD HDJ81 and am looking for options for sliders as well. Thank you.

Okay, I'm a bit tardy with following up with the picture of the installed Slee sliders. It was actually very easy to cut the bracket on the driver's side (RHD) with a cutoff blade on my grinder. The bracket is super overbuilt and I was able to leave plenty of material to keep the integrity. It's just bracing the exhaust, not holding the vehicle together! I did have to hog out the holes a bit where the bracket attaches to the exhaust mount as well since it shifted the bracket a bit as I mounted it over the slider mount. Hopefully the picture is worth 1000 words and it's clear. All in all, I'd definitely recommend the Slee sliders as a very workable fit.

One word of caution, the edges on that heat shield right above the collector is sharp as hell!

 

[duece71]

Looks good, I installed a 3” exhaust not too long ago and am concerned about clearance issues. Not wanting to cut metal on the securing bracket if possible.