Slee Short Bus With Hella 4000s (1 Viewer)

[sprocket3]

I didn't think these would fit on the narrow tabs but it turns out they do. I had searched a lot and didn't find many short bus bumpers with lights attached. So i thought i would post this.

I am thinking of adding another set of tabs where the tubes join and putting the lights wider and lower on the bumper. Sitting down in the V of the tubes.

 

[Ruadhrigh]

very sweet

 

[IdahoDoug]

That would look nice though slightly interfere with the high beams. Nicely protected spot, too.

Pardon stealing the bandwidth, but some also felt 4000s wouldn't fit on the factory ARB tabs and I found they will by slightly bending the tabs and drilling a new hole in the tab. Puts them in the exact sweet spot as wide as possible but not interfering with the high beams. Just FYI for ARB'ers.

DougM

 

[Martin A]

May be a silly question butWhat kind of bar is that?

 

[Brian894X4]

From one fellow shortbus to another, that looks good! As long as you got adequate air flow to the radiator, I think that set up looks awesome! If it were me, I think I'd leave them just like that.

Martin, that's Slee Off Road's new winch bumper. Slee - Toyota 80 Series Land Cruiser - ShortBus Front Bumper Detail

 

[ats4x4dotcom]

ordering my bar in the morning, then wait for the ship to cart it over.

I have some baja design style HID's in 70 w to fit onto the bar.

 

[sprocket3]

Thanks for the feedback. Check out my quick photoshop mod with the lights wider. I like the way it looks. i"m not very good with photo shop though and didn't have much time to make it pretty.

 

[Tapage]

Thanks for the feedback. Check out my quick photoshop mod with the lights wider. I like the way it looks. i"m not very good with photo shop though and didn't have much time to make it pretty.

Looking far better in this position IMOP .. I don't like the light in the top of the front bumper anycase ..

 

[Arya Ebrahimi]

Thanks for the feedback. Check out my quick photoshop mod with the lights wider. I like the way it looks. i"m not very good with photo shop though and didn't have much time to make it pretty.

Throw a winch in there and it will look perfect

 

[sprocket3]

Throw a winch in there and it will look perfect

It's on the truck as i write this. Warn 9.5 XP

 

[sprocket3]

Update:

I took it to a fab shop today. For $60 they are welding on new tabs for the lights. I'm also going to have it re-powder coated to match the Lexus. We found a powder that was real close to the factory color. I'll post final picks in a week or so when it's done.

 

[Doc]

I like the wider look as well. Classy.

 

[trevdawg]

May be a silly question butWhat kind of bar is that?

Its the slee shortbus, Sleeoffroad.com - Toyota SUV Off-Road Outfitters look under the bumpers tab

 

[cooldry]

I got my lightforce 240's yesterday. Apparently, it's going to be a really tight fit. I'm going to have to mod something to make them sit wider apart on the shortbus bumper. I didn't realize how close they were going to be with one another. I'll post pics once I figure out how they will sit on the bumper.

 

[treerootCO]

Christo pointed out this thread to me the other day and convinced me to add some tabs in the valleys.

 

[josharre2000]

do you have any profile shots of your rig with that set up?

 

[sprocket3]

Treeroot: It would be great if he started making them with "tabs in the valleys"

Josh: I don't have any other pictures. The bumper is now off and at the fab/powder coating place for what might be a couple weeks.

I will post detailed pics when it's all done and pretty.

 

[sleeoffroad]

We looked at doing that initially, but the number of lights that would work in that spot is limited due to interference of the tubes. I might revisit this once we see how Treeroot does his.

 

[josharre2000]

Treeroot: It would be great if he started making them with "tabs in the valleys"

Josh: I don't have any other pictures. The bumper is now off and at the fab/powder coating place for what might be a couple weeks.

I will post detailed pics when it's all done and pretty.

I look forward to seeing the pics. The rig looks awesome.

 

[cooldry]

Got my Lightforce XGT's and they were a really tight fit on the bumpers. Went ahead and got the tabs placed in the valley. They worked out great. Thanks for this post Sprocket3.