Skinny Pedal gets a 350!

[slvrbck]

Ok, scored a 350 and a sm420. I have a good amount of parts, just looking around for the rest. I'll start with a list of what I have......


ENGINE:
350 long block, heads, valve covers, oil pan
water pump
intake
carb
starter
alternator
HEI distributor
ram horn manifolds
plug wires
flywheel

SM420:
clutch
pressure plate

Things I need:
radiator
fan
pulleys
motor mounts

The other stuff I need is mostly small stuff, nuts and bolts here and there, plumbing, thta sort of stuff. Looking forward to wiring and such! The biggest thing I need is the SM420/3speed tranny adapter, so if you have one hiding in your sock drawer, let me know please. Also, any advice on the swap all together would be appreciated. Add to my list of parts too please, I know I have forgotten a bunch of stuff.

On a side note, I am looking for a set of 4 inch springs for the front as well, so if anybody has any hiding beside the tranny/x-case adapter in the sock drawer, let me know.

Thanks,

Chris

 

[SARMARK]

I sure hope you get some help with the parts you need so you can get all set up they way you want. I can't wait to go wheeling with you when you are done.

 

[chicago]

Good luck with the build bro!
Cant wait to see the progress as she goes!
When is the tear down?

K

 

[slvrbck]

Good luck with the build bro!
Cant wait to see the progress as she goes!
When is the tear down?

K

I'm excited too. I am trying to get all my parts rounded up, then in Jan. take a week and knock this baby out. We are going to use Mark's rig as an example.

 

[slvrbck]

I sure hope you get some help with the parts you need so you can get all set up they way you want. I can't wait to go wheeling with you when you are done.

You and me both!!! I have a good start so far, just have to find that trans/x-fer case adapter.

 

[slvrbck]

Scoopin' up a roll cage

The said she wouldn't ride in the 40 without a full roll cage after I put the 350 in it......so I cruz craigslist last night and I find this baby. And the price isn't a misprint, I called to confirm and I am leaving in an hour or so to go get it. Here is the link.....

Roll Bar FJ Cruiser

 

[rusty_tlc]

That doesn't look like a stock roll bar.

I have a stock roll bar in storage, I wouldn't trust it even in a slow roll never mind a highway speed roll. The metal is scary thin.

Is a roll cage the place you want to go cheap?

 

[slvrbck]

Could you not see the picture? It isn't a stocker, he put a question mark beside it. He came across it somehow or another I guess. It has the front hoop, cross bar and dual spreaders overhead.

 

[slvrbck]

That doesn't look like a stock roll bar.

Oops, I overlooked this, guess you did see the picture....

I have a stock bar in mine right now too, that's why I have been looking to get a cage. Next summer we can add to the back and do the whole family cage thing.

 

[DiscoveryXD]

tiny pictures tiny pictures!!!

 

[slvrbck]

I know right....I don't know why it wouldn't let me post them straight from the computer, I had to do it from another site.....then they came out like this.......

 

[DiscoveryXD]

i think you need to take the cut off wheel to your computer now. post pics of that when you're done to!

you using photobucket?

 

[rusty_tlc]

Mad 'puter skilz in this thread.
I think you are attaching the thumbnails instead of the actual pictures.

 

[slvrbck]

It will look better when I stretch the wheelbase out a bit. Figured while I was in the sheetmetal hatin' mood, I might as well cut some off.

 

[slvrbck]

The blinkers will be gone shortly, and fenders will be rounded off. Got the picture thing figured out I guess.LOL! I don't claim to be no 'puter genious......

 

[slvrbck]

And 1 more.....

 

[chicago]

Sheet metal hater!
Did ya find some of the parts you were looking for?
Im not sure what will fit with what you wanna do, if you wanna use NEW gear, or used stuff?

K

 

[chicago]

BTW...Pick and pull has TONS of the older chevy motors in rigs down there, that Im sure you could score MOST of the little crap youll need.
With the Vortec, my only option is to go to Reno auto wreckers because of the late model....Those guyz seem to get first dibs on wrecked late model cars and trucks.

Im sure you know this and or have checked, but just thought Id throw that out, just in case.

I think Downey has the adapter...not sure how much, but.
Jim posts here on mud in the forums as well. There are GOBS of AA re-sellers on here too. One of them is Orangefj45 (georg)...GREAT GUY, an invalueable resource and an AMAZING builder too. If you PM him, he can get you a discount, but youll have to order it directly from him. For my adapter for the 4L60E to the NP203, Downey had the best price, FWIW.
Also, might wanna post up in the "wanted" section...Folks have some unusual parts lying around.

Just a few resources for ya.

K

 

[slvrbck]

BTW...Pick and pull has TONS of the older chevy motors in rigs down there, that Im sure you could score MOST of the little **** youll need.
With the Vortec, my only option is to go to Reno auto wreckers because of the late model....Those guyz seem to get first dibs on wrecked late model cars and trucks.

Im sure you know this and or have checked, but just thought Id throw that out, just in case.

I think Downey has the adapter...not sure how much, but.
Jim posts here on mud in the forums as well. There are GOBS of AA re-sellers on here too. One of them is Orangefj45 (georg)...GREAT GUY, an invalueable resource and an AMAZING builder too. If you PM him, he can get you a discount, but youll have to order it directly from him. For my adapter for the 4L60E to the NP203, Downey had the best price, FWIW.
Also, might wanna post up in the "wanted" section...Folks have some unusual parts lying around.

Just a few resources for ya.

K

I need a few things here and there. Gonna go grab the trans from my brother in laws this week. I checked with Orangefj45, he does have a good price for the AA adapter. I also looked at EBI and a few others. There were a few on craigslist, but I am a little skiddish of driving all the way to Sac-town for a used adapter if you know what I mean. Hopefully in the next few weeks I'll get started on the ole rust bucket......???

 

[slvrbck]

Sheet metal hater!
Did ya find some of the parts you were looking for?
Im not sure what will fit with what you wanna do, if you wanna use NEW gear, or used stuff?

K

I DO HATE SHEETMETAL!!! If I could get away with it, I would have a winshield and a hood, THAT'S IT!!! Now why is it that tube buggies aren't street legal again???