Skid plate part numbers

[Str8Razor]

I need to replace the front skid plates where they were not replaced by someone doing an oil change. I can’t figure out the part numbers after having looked at a couple of parts websites, I will also need the bolts… I found a picture of what i am looking for in another thread but could not find the part numbers, will need the bolts/ hardware to re install it as well….
Thanks for any help!!!!

 

[turbo8]

I need to replace the front skid plates where they were not replaced by someone doing an oil change. I can’t figure out the part numbers after having looked at a couple of parts websites, I will also need the bolts… I found a picture of what i am looking for in another thread but could not find the part numbers, will need the bolts/ hardware to re install it as well….
Thanks for any help!!!!View attachment 2771117

SUSPENSION CROSSMEMBER & UNDER COVER | Lexus LEXUS LX570 URJ201L-GNTGKA URJ201 | Parts Catalogs | PartSouq

If you are looking for SUSPENSION CROSSMEMBER & UNDER COVER Parts for Lexus LEXUS LX570 URJ201L-GNTGKA URJ201 then we advise you to pay attention to the range of our spare parts catalog for Lexus!

partsouq.com

Might want to ask if anyone here has their left over stock skids.

 

[bentonrover]

I need to replace the front skid plates where they were not replaced by someone doing an oil change. I can’t figure out the part numbers after having looked at a couple of parts websites, I will also need the bolts… I found a picture of what i am looking for in another thread but could not find the part numbers, will need the bolts/ hardware to re install it as well….
Thanks for any help!!!!View attachment 2771117

Also had that issue. Here is what I ordered.
Shield - pan that covers oil filter
Protector - transmission pan cover
Rear sheild - oil drain cover

Once you pull up one shield they all come up. Then you can pick what you need. Pretty sure the bolts came up also. Hope this helps

 

[Str8Razor]

Also had that issue. Here is what I ordered.
Shield - pan that covers oil filter
Protector - transmission pan cover
Rear sheild - oil drain cover

Once you pull up one shield they all come up. Then you can pick what you need. Pretty sure the bolts came up also. Hope this helps

View attachment 2771327

Thanks a lot man, got the parts ordered this morning hope to have them later this week, good looking out!!

 

[bentonrover]

Thanks a lot man, got the parts ordered this morning hope to have them later this week, good looking out!!

No doubt that's why we here bro

 

[TheIcemanCometh]

Gotta ask who did the oil change? and why are they not replacing them? Guessing the previous owner ....

 

[Str8Razor]

Gotta ask who did the oil change? and why are they not replacing them? Guessing the previous owner ....

Exactly, was like this when I got it…

 

[bentonrover]

Mine was also missing when I purchased it. Full service from dealer every 5k miles. Lazy techs is my guess. Not to mention owners that never bothered to look afterwards? Should they really have too?

 

[Str8Razor]

No doubt that's why we here bro

Did the oil change today, still waiting on skid plate parts but I was unable to get the filter drain plug to seperate from the filter housing, it’s over torqued, It spun the whole filter housing out when I tried to loosen in…. Hot oil every where… going to order another housing and drain plug as I can’t afford to break the housing and have the truck down… I even put it in a vise and still couldn’t get it to break free… will order the new stuff and have it ready for the next oil change…

 

[bloc]

Did the oil change today, still waiting on skid plate parts but I was unable to get the filter drain plug to seperate from the filter housing, it’s over torqued, It spun the whole filter housing out when I tried to loosen in…. Hot oil every where… going to order another housing and drain plug as I can’t afford to break the housing and have the truck down… I even put it in a vise and still couldn’t get it to break free… will order the new stuff and have it ready for the next oil change…

Look into the aluminum part from a venza. You’ll have to move your filter support tube over but that is easy. The drain plug goes to 9ft-lb and the cover to 18.