Wanted San Diego - FJ40 Roll Bar (2 Viewers)

[bmoonhajjar]

Vehicle Model

1. 40 Series

Looking for an FJ40 roll bar in SoCal. Hit me up if you have one.

 

[65swb45]

Factory or aftermarket?

 

[bmoonhajjar]

Factory or aftermarket?

Factory

 

[bmoonhajjar]

Factory

Actually helping @Dtown find one.

 

[Dtown]

Looking for the bolt together one that will fit the 20" jumper seat in between it. Thanks.

 

[Blackcat37]

My buddy has a really nice one in Sacramento if you decide to travel or know of someone driving down.

 

[Living in the Past]

Looking for the bolt together one that will fit the 20" jumper seat in between it. Thanks.

View attachment 3989557

The one pictured is a modified version. Guessing it has a main loop in the back as well as the one in the front.

I know of at least three versions of roll bars in the US market. 9/72-8/76. After that the radius on the side bars was shorter to clear the handle for the vent window. 8/76-2/78 had the sharp radius but did not have provision for the seat belts. 2/78-1/79 had could mount the seat belt and was still black. 1/79+ roll bar was grey. I do not have a 2/78-1/79 but have roll bars from before and after. The later bars with the seat belt provision were heavier steel. They also have another bolt thru the main bar where the sides attach. If the 2/78-1/79 was made with heavier steel and has the extra bolt I'm not sure.

 

[65swb45]

The one pictured is a modified version. Guessing it has a main loop in the back as well as the one in the front.

I know of at least three versions of roll bars in the US market. 9/72-8/76. After that the radius on the side bars was shorter to clear the handle for the vent window. 8/76-2/78 had the sharp radius but did not have provision for the seat belts. 2/78-1/79 had could mount the seat belt and was still black. 1/79+ roll bar was grey. I do not have a 2/78-1/79 but have roll bars from before and after. The later bars with the seat belt provision were heavier steel. They also have another bolt thru the main bar where the sides attach. If the 2/78-1/79 was made with heavier steel and has the extra bolt I'm not sure.

This should be in a FAQ. Nice, short synopsis John .

 

[pardion]

Like Blackcat37 mentioned, I also have a couple in Northern California , DM if still searching.