SOLD **SALE PENDING** SW Utah: 1992 FJ80 w/Diesel swap

Year

1992

Vehicle Model

1. 80 Series

Mileage

193000

Color

Red

Selling my 92 80 series w/ a Isuzu 4BD1T (4cyl, turbo) swap, here's a list of some of the mods and pieces and parts....

The 80 has a full wrap that is very close to the factory color and all the graphics were laid on top of the wrap, the whole thing was done in June of 2021. At the same time, I had the bumpers powder coated a bronze color to match the wheels, I had the windows tinted and put on a set (5) of Kanati 317/75/16 mud terrain tires.

-1986 Isuzu 3.9 liter 4BD1T from an NPR chassis
-Factory Toyota automatic trans, transfer case and axles
-ARB front locker
-Aussie rear locker
- 4.88 gears from Cruiser Outfitters
-Fab Fours front and rear bumpers
-Warn 8000# winch w/ wireless controller
-Factor 55 winch block and soft shackles
-ARB roof rack
-ARB awning
-ARB fridge slide with plug in mounted in the side compartment
-ARB twin compressor, rebuilt w/ 2 new motors 7/21
-aluminum radiator w/ dual Dorel elect. fans
-ICON 2.0 single tube shocks all around
-OME steering dampener
-dual Optima batteries
-Amsoil dual remote filters w/ bypass. Oil and filters changed 3/15/22
-Slee 4" heavy lift
-rock sliders
- 3" exhaust w/ Magnaflow muffler
-5 gallon air tank in the old spare location w/ air hose to reach all the tires and then some
-I have a 30 gallon tub of spare and extra parts from clamps to braided line to gaskets
- 193k on the odometer
-has some trail rash/small dents/desert pinstriping
-rust free desert LC all of its life, I know there's dust all over everything in the pics but I live in the desert and that's just part of life out here.
- no A/C, I do have a lot of the parts to fab something up though

I have driven this to Moab (4hrs) to go wheeling a couple times, driven to Salt Lake City (4hrs), down to Vegas (2hrs) and to trail events here in the SW and its not a powerhouse by any stretch but it goes and wheels and gets me home.

I know there is a lot of things I didn't list so feel free to ask or PM me with any questions.

Price.....$13,500

 

[olive]

Pics

 

[olive]

Interior

 

[olive]

Pics

 

[Tennessee80]

Cool cruiser, what would it take to add AC? Are there not brackets and compressors that would work with that Isuzu engine? Any issues with the engine (leaks, problems, )?

 

[olive]

Cool cruiser, what would it take to add AC? Are there not brackets and compressors that would work with that Isuzu engine? Any issues with the engine (leaks, problems, )?

There's just not a lot of room for the factory compressor (which I have) so I got a new compressor from a Subaru wagon and the line set. It will need a bracket fabricated but there are mounts for one. It does still have the factory heat exchanger in it that was sealed off so it wouldn't get contaminated and everything under the dash is still there. There are a couple drips on it, I think the power steering pump is dripping around one of the fittings.