Remove ARB bumper, 2001 LX470

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Jason London

Jason London

10 Year
Joined
May 19, 2015
Threads
6
Messages
82
Location
Denton, TX
This is probably the reverse of what most of you are looking to do, but i thought id ask since you are likely to have insight into the installation of the ARB bumper. I believe it's a combination bumper. I want to put the LX back to factory condition. Any insight you may have into what I would need or if it's possible to go to factory would be great.

A few questions i have:

1) Is any hardware removed or cut off from the vehicle in order to install the ARB?

2) If so, what is removed.

if you can think of anything i haven't, please feel free to let me know.


hope my picture works.

cheers,

Jason

0fRiO9o.jpg
 
The bottom part of the frame horn the hangs low is cut..... but I don't think it'll materially affect reinstalling the OEM .......A bit less secure but minimally so....
 
I'd be happy to get some photos of the frame where the brackets are bolted on. It's dark and there are tornados on the prowl in north Texas right now, it may be tomorrow.
 
I live in north Dallas area. I may be interested in swapping needed parts for the change over. Not sue what the value of this bumper is used.
 
on the ARB the bottom bracket at the end of the frame rails are trimmed so the ARB mounts can slide over .... do you have a replacement bumper ? I think you'll find one mount bolt will not have a home but it shouldn't be crucial.

Iphone 5-8-15 005.webp
Iphone 5-8-15 011.webp
 
The only thing I have is the original bumper skin, which is heavily scratched from years of being in an attic. I think I'm missing the foam insert and the cross bar support. What does the bottom part of the OEM bumper attach to? Does the lower attach to the cross bar?
 
You must log in or register to reply here.

Share this page

Back
Top Bottom