Red hazard switch part number (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Shiny! I like your winch switch too, is it hooked up?

Any chance of anyone that already has one pulling their red switch out for a second and getting a part number or assembly number off it?
 
I like the firefly reference.

The winch control is halfway done. I have it wired to the slee relay and run under the hood. I'm on pause looking for a spare winch remote to wire into or at least some more definitive info on opening the winch and wiring directly.

I'll try to pull a hazard part number this afternoon.
 
Thought you might by your tagline. I lost a fender flare on the highway the other day and thought to myself "did the fender flare just fall off my rig for no gorram reason?"

Any number help would be very appreciated, as we've been trying to find a good part number for these for some time now. I have connections in Japan, and I just know I can get one if I can cross reference it to something...
 
Funny. This is what my switch has:

ImageUploadedByIH8MUD Forum1426431884.667157.jpg


ImageUploadedByIH8MUD Forum1426431897.707193.jpg
 
Dude you rock! Thank you!
 
I can confirm that P/N 84332-26080 is still a valid and available part number. Procured one of these on a recent order from Partsouq. Ordered on Monday, and arrived via FedEx on Friday. The triangle is indeed sideways, but 99.9% of people would never notice this (only us OCD Mudders).

I have too many switches that are black, and want this one to stand out...as the road I commute with blind corners often has unplanned stops.

full
 
good looking switch and thank you for the update but it looks like the vertical style not horizontal if that matters to you.
 
How much is this switch?
 
As an FYI, this is still available on ParSouq...I just ordered one for $45.28 plus about $15 for FedEx shipping.

As a note…the site kept telling me “fraud suspected” running my debit card but was totally ok running THE SAME CARD through PayPal 🤷‍♂️🤔 It was verified though so I should have it soon!

Looking forward to this small interior update!

Partsouq Link for Red Hazard Switch Part # 84332-26080
 
Last edited:
It looks like the horizontal sticker red version is 84332-20260 and/or 84332-60190, both of which appear to be NLA and replaced with the black version.
 
It looks like the horizontal sticker red version is 84332-20260 and/or 84332-60190, both of which appear to be NLA and replaced with the black version.
Yeah, the vertical version sitting horizontal is gonna but me for about a day, and then every time I look at it, BUT the red is going to be better to see in more dark traveling.
 
I installed the vertical version sitting horizontal and it's fine. And I'm very particular about stuff like that. The red button is cool and my Cruiser buddies are jealous. You'll like it.
 
I looked in Toyodiy have come across three different part numbers for the hazard switch - 84332-60190 up to 7/91, 84332-20260 up to 7/92, and 84332-42010 for the later years. I don't know if any of those are red as opposed to black. As they all have vastly different part numbers they may not be interchangable. I don't know if the hazard function schematics have any or much variation.

84332-26080 which got mentioned earlier in the topic is for a 1989 to 2006 Hi-Ace.

I saw it listed on Ebay through Partsouq for A$82.76.
 
Last edited:
I bought a new one for $19 shipped during the pando, to use as a CDL switch. Swapped the icon out, but I do vinyl, so there's that. Looks like even hazards are jumping in price. They're on to us! I think an actual CDL switch was close to a hundo at the time, so...
 
I bought a new one for $19 shipped during the pando, to use as a CDL switch. Swapped the icon out, but I do vinyl, so there's that. Looks like even hazards are jumping in price. They're on to us! I think an actual CDL switch was close to a hundo at the time, so...
Yeah, I've noticed a price jump in a lot of little things like this.
And honestly, after thinking about it last night...I could have just grabbed another hazard switch and paint it matte red. Oh, well.

I paid $60 (free shipping) for the CDL switch for my 1997 recently. I went through an ebay seller I've worked with in the past for numerous small OEM parts out of Japan. Real good seller, top notch parts that are NEW.

You work in vinyl...? Is it possible to get the triangle sticker from you that's facing the right way? :cool: 👍
 

Users who are viewing this thread

Back
Top Bottom