for my 99 runner. more info on it here: http://4rnr.net
now for what i'm building:
list of materials:
3.5"x3.5"x3/16" square tubing 72" long - main beam
2"x2"x3/16" square tubing 96" long - carrier frame
1.5"x1.5"x3/16" angle 72" long - bottom rock rail
24"x26"x3/16" plate - frame mounting brackets
28"x48"x1/8" plate - side plate (didn't have enough 3/16" plate)
32"x12"x16ga plate - top finish plate on sides
misc drop steel including some 2"x4" triangular gussets and some 3/16" plate & solid bar for other stuff.
in all, about $150 for the steel, then:
slee spindle is ordered and shipped - $95 + shipping
hitch receiver and safety chain loop is here - $29 shipped.
later, i'll order the latch and hold-open pin... about $100 for stainless steel.
similar bumpers:
input? questions? advise?
now for what i'm building:
list of materials:
3.5"x3.5"x3/16" square tubing 72" long - main beam
2"x2"x3/16" square tubing 96" long - carrier frame
1.5"x1.5"x3/16" angle 72" long - bottom rock rail
24"x26"x3/16" plate - frame mounting brackets
28"x48"x1/8" plate - side plate (didn't have enough 3/16" plate)
32"x12"x16ga plate - top finish plate on sides
misc drop steel including some 2"x4" triangular gussets and some 3/16" plate & solid bar for other stuff.
in all, about $150 for the steel, then:
slee spindle is ordered and shipped - $95 + shipping
hitch receiver and safety chain loop is here - $29 shipped.
later, i'll order the latch and hold-open pin... about $100 for stainless steel.
similar bumpers:
input? questions? advise?
Last edited: