Radiator assistance- (1 Viewer)

[OzarkMtnCruiser]

Is the top square nut on a stud or am I going to have to loosen the condenser to get to the back of the bolt? Thanks-

 

[OSS]

There aren’t any studs on the radiator support body panel. Twist the nut and see if the bolt turns too.

 

[3_puppies]

you need to remove the bolt from the front side, I usually take the condensor loose and let drop down and have access to the bolt heads

 

[Spike Strip]

Did u get the new Rad yet?

 

[OzarkMtnCruiser]

you need to remove the bolt from the front side, I usually take the condensor loose and let drop down and have access to the bolt heads

Thanks- I was able to break the nuts free and was hoping they were on studs- it would be a simple radiator exchange if they were- I had my shroud cut in half when the water pump was replaced so it was easy access to everything once I removed battery and tray. If everything was laid out and drained it wouldn't take an hour- Was just prepping today- swapping it out tomorrow.. thx

 

[OzarkMtnCruiser]

Did u get the new Rad yet?

Tomorrow- i'll post up some pics. 26lb freight weight sounds good.