Racks, Sliders and Control Arms (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

TonyP said:
What are the details on the TD suspension? The 53mm TD shock sounds beefy.
Click to expand...

The 45mm or 53mm are SMOOTH, COMFY and can take a hard beating... I'm only ordering in a few sets for the 200. 53mm C/Os w/ 53mm rears and 45mm 9 stage adjustable C/Os and 45mm 9 stage adjustable rears.

As far as lift and rates--- 0-300KG (660#) or Heavy 300kg+ (660# PLUS) on coils

These are leveling kits for 1.5" or 2" lifts

Jason
 
200- Expo Lo-Pro

200- Sliders

J
IMG_20170117_110844718.jpg
IMG_20170117_110855566.jpg
IMG_20170117_110832616.jpg
IMG_20170117_131401628.jpg
 
I've had a few questions on the racks and sliders.

Sliders ship FedEx and weigh 62# each side (124# a set) all hardware, taps and drill bits are included in the kit. Standard options 835.00 shipped bare metal.


The above pictured roof rack is 52" x 86" and made from 1" x .083" HREW tube. Weighed in at 72#s. These ship freight ONLY or pick up/MUDship is always welcome.

Yes, I can make most any rack configuration or will build to suit the clients wants and needs. Not much more than my standard rack pricing. Flooring/grid, light tabs, tie down points, jerry can and propane mounts w/E-track ratchet straps etc..

Rack mounts are adjustable from 3.25" - 4.75". In the lowest setting it should put the rack approx. 3/4" off the highest point on the roof line.

Rack as pictured above would be 775.00 bare metal with 8 mounts plus 145.00 shipping to a business.

Give me a shout to discuss any questions, options or pricing.

Jason
 
reevesci said:
Finally had time to make a set of the new RUCAs and take a pic. These are the turnbuckle style and on vehicle adjustment.

Also, started a set of custom sliders. I kind of dig the rails he requested.

J

View attachment 1398381 View attachment 1398382
Click to expand...


Do you yave any more installed photos of 200 sliders installed? I'm looking at the distance they extend from the body.
 
Jason,
Can I just have my work checks direct deposited to your account? And then you can just send me cool stuff every month? :)

I just sent you an email asking for some more info on the suspension for my 200. It's got a 100K on it now and my wife just got another vehicle so she won't be DDing the 200 any longer. Open the flood gates for mods! Ha - ok maybe slightly open the tap in bathroom sink for mods.....
 
NLScooby said:
Jason,
Can I just have my work checks direct deposited to your account? And then you can just send me cool stuff every month? :)

I just sent you an email asking for some more info on the suspension for my 200. It's got a 100K on it now and my wife just got another vehicle so she won't be DDing the 200 any longer. Open the flood gates for mods! Ha - ok maybe slightly open the tap in bathroom sink for mods.....
Click to expand...



Replied to the email with a few options, questions and videos. Let me know if I can be of further assistance.

Jason
 
Very cool looking gear... although I have an LX. :( I would love to see some slider options for my truck. (hint hint) I've not ever ventured over to Jackson, WY but I would up for it if it included sliders for my LX!:steer:

Before anyone brings it up again, yes I have seen that Slee is working up something, but I also know that they are replacing body panels too. I am not a fan of that.
 
LCHardriver_02 said:
Very cool looking gear... although I have an LX. :( I would love to see some slider options for my truck. (hint hint) I've not ever ventured over to Jackson, WY but I would up for it if it included sliders for my LX!:steer:

Before anyone brings it up again, yes I have seen that Slee is working up something, but I also know that they are replacing body panels too. I am not a fan of that.
Click to expand...


I'm in Green River, WY. If you can swing down for a 2-3 day weekend I'm sure I can get you a set made up.

Jason
 
reevesci said:
I'm in Green River, WY. If you can swing down for a 2-3 day weekend I'm sure I can get you a set made up.

Jason
Click to expand...
You might get a list of orders if you can make them.
 
DeckerT4R said:
You might get a list of orders if you can make them.
Click to expand...


There are a few here in town. I'll see if I can get some ideas.

The molded pieces are the PITA. There was a guy that had made his own up in Jackson but I never paid too much attention to them. If memory serves, he cut the molded step and then built the slider under the straight line he cut. I'd say the bottom of the slider rail was pretty much the same height as the bottom of the molded step.

I'll call around to my Jackson contacts and see it anyone can locate it and snap some pics.

Forgive the crude mark up pic but from memory and 2 years ago.

J

LX570.jpg
 
You must log in or register to reply here.

Similar threads

J
lower control arms and steering rack - need opinions on replacement timing
Replies
3
Views
588
linuxgod
linuxgod
Queglay
Whiteline lower control arm camber bolts vs genuine
Replies
4
Views
466
Queglay
Queglay
A
Lower control arm bushing?
Replies
8
Views
1K
doru
D
CharlieS
Part verification- rear lower control arm front nut and bolt
Replies
2
Views
575
CharlieS
CharlieS

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom