R150f to FJ Tcase (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 22, 2021
Threads
4
Messages
14
Location
Florida
Hey yall, you mightve seen some of my post asking some questions about the R150f and bolting it to a FJ tcase(part-time from an auto FJ)

What I can tell you is that they have the same input shafts(slid the tcase that came with the R150f onto my a750f and it was a perfect fit). The issue is that they dont have the same bolt patterns, so they dont line up.

Do any of yall know where I could possibly get an adapter plate from?
 
It looks like a Hilux (KUN25, KUN26) uses the same transfer case and an R151f transmission so there is a stock adapter, which is basically the rear half of the transmission case (36107-0K010, 36107-0K030, 36107-0K050). You'll need to have more details to figure out which one fits your transmission.
 
Last edited:
It looks like a Hilux (KUN25, KUN26) uses the same transfer case and an R151f transmission so there is a stock adapter, which is basically the rear half of the transmission case (36107-0K010, 36107-0K030, 36107-0K050). You'll need to have more details to figure out which one fits your transmission.

So, i figured out the r155f from the 4cyl 5 speed 2nd gen tacoma has a tail housing that goes straight to it. gotta cheap tranny in alright conditions, important part was that the tail housing was in good shape!
hopefully will have them connected tomorrow!
 

Users who are viewing this thread

Back
Top Bottom