Needs completion. $15k firm takes it home....
https://forum.ih8mud.com/hardcore-corner/52322-fzj80-taco-6-speed-orion.html
https://forum.ih8mud.com/hardcore-corner/52322-fzj80-taco-6-speed-orion.html
Project fzj80 6 speed orion
- Thread starter bjowett
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
What more needs to be done?
bjowett
Supporting Vendor
- Thread starter
- #3
The basic list...
Install radiator and modify support.
Complete the cable shift.
Possibly adjust clutch pedal ratio.
Finalize exhaust which includes installing O2 sensor bungs.
Bolt in fornt driveshaft.
probably a dozen or so smaller items
Here's a quick rundown of the hi-po stuff....
Completely rebuilt hi-po 4.6, never started.
dual 2.25" exhaust
New Tacoma 6 speed trans with nearly new spare
Orion t-case.
Cv front shaft.
New Poly axles and Longfields
4.88 gears w/ factory lockers
New 37" MT Claws on steel wheels
Custom Superwinch Husky
Dual Koni shocks front and rear
More new and rebuilt systems than I can think of, hoses, wires, plugs, bearings.
Limited listing here, I will probably decide not to sell it by spring time...
Install radiator and modify support.
Complete the cable shift.
Possibly adjust clutch pedal ratio.
Finalize exhaust which includes installing O2 sensor bungs.
Bolt in fornt driveshaft.
probably a dozen or so smaller items
Here's a quick rundown of the hi-po stuff....
Completely rebuilt hi-po 4.6, never started.
dual 2.25" exhaust
New Tacoma 6 speed trans with nearly new spare
Orion t-case.
Cv front shaft.
New Poly axles and Longfields
4.88 gears w/ factory lockers
New 37" MT Claws on steel wheels
Custom Superwinch Husky
Dual Koni shocks front and rear
More new and rebuilt systems than I can think of, hoses, wires, plugs, bearings.
Limited listing here, I will probably decide not to sell it by spring time...
