Builds Project Bob (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Some of the larger companies like greenlee(spelling?) have fuel grade hose in that size, much more flexable than the factory hardened rubber.

Rob


Hey what are you going to use as a filler tube? I am having trouble finding any hose to work.
 
Some of the larger companies like greenlee(spelling?) have fuel grade hose in that size, much more flexable than the factory hardened rubber.

Rob

Thanks Ill do a google search and see if I can find them.
 
what's that at the bottom of the setup



I ask because it looks startlingly like the filter from my electrolux :D
Stock pre filter
 
Hey what are you going to use as a filler tube? I am having trouble finding any hose to work.
2" silicone hose. I only need about 6" to bolt up to the stock fuel neck (flipped)
 
AA did not make the boot. It looks like the ones being sold on Ebay.
 
what did you do with the turbo manifold (other thread) ' cuz I am startin to think I might have a cracked manifold , and if'n I was gonna replace it...



"honey, the manifold is cracked, but I know a guy named jason, who can send me a new one that will fit my turbo..."
 
Thats the same boot I used on my tripple shifter. It came from JB Customs I believe. Not he greatest quality, but its pretty much the only game in town and the price is not bad.

Bob is looking good. What a pain in the ass that intank pump is! leave it to Jason to always take the hard way :D
 
Mustang on the pre filter.


Turbo manifold will be taken to a turbo place in town for duplication. Plus, my turbine section of the T4 was hashed.. I need another. :(
 
You fabbin up a skid for this bling tank? So, a 20 gal. Chebby S10 Blazer tank wasn't big enough? You saw how mine tucked perfectly inside the frame & BELOW THE FLOORBOARD on my 55? :) Over 40K hits on this softcore buildup! Good job dude! Also, thanks for starting a thread about the 2F turbo - I was waiting for you spread the knowledge to us one :banana: mechanics :bounce2:
 
all vac lines are hooked up, the fuel system is done..

Got a couple of wires to hook up.

I need a 84 FJ60 wiring diagram..
 
F'n stellar!!!!
 
Hey, keep the chatter from the other thread in the other thread. I had to reread half of this page thinkin' "Oh crap, he's gonna turbo the damn Bob'stang too?" :eek:
 
Here are some of the donor parts for BOB.

I took a hammer and chisel to make sure things were solid before going to all the work of removing these. The outer plate is the only thing wrong with the righ corner. The inner structure is solid.
DSCF2694.JPG
DSCF2695.JPG
 

Users who are viewing this thread

Back
Top Bottom