Builds Project Bob (3 Viewers)

[Radd Cruisers]

Some of the larger companies like greenlee(spelling?) have fuel grade hose in that size, much more flexable than the factory hardened rubber.

Rob

Hey what are you going to use as a filler tube? I am having trouble finding any hose to work.

 

[lowtideride]

Some of the larger companies like greenlee(spelling?) have fuel grade hose in that size, much more flexable than the factory hardened rubber.

Rob

Thanks Ill do a google search and see if I can find them.

 

[Mace]

what's that at the bottom of the setup



I ask because it looks startlingly like the filter from my electrolux

Stock pre filter

 

[Mace]

Hey what are you going to use as a filler tube? I am having trouble finding any hose to work.

2" silicone hose. I only need about 6" to bolt up to the stock fuel neck (flipped)

 

[Mace]

AA did not make the boot. It looks like the ones being sold on Ebay.

 

[lowtideride]

2" silicone hose. I only need about 6" to bolt up to the stock fuel neck (flipped)

where did you get that? I need about 2ft.

 

[Mace]

like this

http://store.summitracing.com/partd...TNT-30128-1&N=700+4294925239+115&autoview=sku

They sell it on Ebay as well..

 

[gladly]

Stock pre filter

stock 60, or stock mustang?
(or stock electrolux?)

 

[gladly]

what did you do with the turbo manifold (other thread) ' cuz I am startin to think I might have a cracked manifold , and if'n I was gonna replace it...



"honey, the manifold is cracked, but I know a guy named jason, who can send me a new one that will fit my turbo..."

 

[sixty]

Thats the same boot I used on my tripple shifter. It came from JB Customs I believe. Not he greatest quality, but its pretty much the only game in town and the price is not bad.

Bob is looking good. What a pain in the ass that intank pump is! leave it to Jason to always take the hard way

 

[Mace]

Mustang on the pre filter.


Turbo manifold will be taken to a turbo place in town for duplication. Plus, my turbine section of the T4 was hashed.. I need another.

 

[LC_Hamma]

You fabbin up a skid for this bling tank? So, a 20 gal. Chebby S10 Blazer tank wasn't big enough? You saw how mine tucked perfectly inside the frame & BELOW THE FLOORBOARD on my 55? Over 40K hits on this softcore buildup! Good job dude! Also, thanks for starting a thread about the 2F turbo - I was waiting for you spread the knowledge to us one mechanics

 

[DHONDAGOD]

Does it run yet?



Chris

 

[Mace]

all vac lines are hooked up, the fuel system is done..

Got a couple of wires to hook up.

I need a 84 FJ60 wiring diagram..

 

[cruiser88]

all vac lines are hooked up, the fuel system is done..

Got a couple of wires to hook up.

I need a 84 FJ60 wiring diagram..

Give me a minute

 

[cruiser88]

will 83 work?


http://web.mac.com/jdhall3/iWeb/Site/FJ60.html

 

[Mace]

F'n stellar!!!!

 

[cruiser88]

I noticed it the other day and saved it to my desktop

 

[hammerhead]

Hey, keep the chatter from the other thread in the other thread. I had to reread half of this page thinkin' "Oh crap, he's gonna turbo the damn Bob'stang too?"

 

[D'Animal]

Here are some of the donor parts for BOB.

I took a hammer and chisel to make sure things were solid before going to all the work of removing these. The outer plate is the only thing wrong with the righ corner. The inner structure is solid.