Primary Throttle Plate Set Screws for '73 Carburetor?

[4Cruisers]

I need to replace the primary throttle valve set screws on one of my '73 carburetors, Toyota Part Number 21821-34031. It looks like they're NLA. I can't find an equivalent part number. What length, diameter, and thread pitch should I be looking for? It looks like they're brass screws. Does anyone have a source for these?

 

[4Cruisers]

Looking to finish reassembling this carburetor, any help would be appreciated.

 

[4Cruisers]

Never mind, I just found an earlier thread - M3 X 5mm 0.5 pitch (thanks @Vae Victus). I'll check at the Ace Hardware in Santa Fe tomorrow morning, they have an extensive stock of hard-to-find hardware.

 

[65swb45]

@thebigredrocker pointed out to me a couple of years ago that the screws are readily available from McMaster. I hadn’t thought to look myself.

 

[4Cruisers]

@thebigredrocker pointed out to me a couple of years ago that the screws are readily available from McMaster. I hadn’t thought to look myself.

That'll be my next place to go.

 

[AnthroHowl]

I need to replace the primary throttle valve set screws on one of my '73 carburetors, Toyota Part Number 21821-34031. It looks like they're NLA. I can't find an equivalent part number. What length, diameter, and thread pitch should I be looking for? It looks like they're brass screws. Does anyone have a source for these?

How did you find the part number for the throttle plate screws? Wondering if they'd be the same size for the 2 barrel on the 60s.

 

[4Cruisers]

I have quite few left from my McMaster-Carr purchase, and a spare FJ60 carburetor in the basement. I should be able to answer your question later this afternoon. If they'll work I can send you some.

 

[AnthroHowl]

yeah let me know. I snapped those off while trying to rebuild the carb. I intend on ordering a second carb to install for now, and plan to rebuild the old carb as a winter project. I am in alaska so i am making a huge push to get my rig on the road for winter.

 

[4Cruisers]

I won't be able to check into it until tomorrow morning.

 

[AnthroHowl]

Aint no rush. I appreciate you checking.

 

[4Cruisers]

I had a few minutes before bed, they look to be the same size. The FJ60 online parts diagrams don't show separate part numbers for those screws. PM me your address and I'll send six of them your way tomorrow.

 

[AnthroHowl]

you're awesome. thanks for the hook up. I'll pm you my address.