Powersteering

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 10, 2006
Threads
99
Messages
501
Location
The Ghetto
The powersteering went out on me driving around this morning and I dropped my 72 FJ40 off at the dealership. I Just got off the phone with them and low and behold I need new belts. Now they are wanting to charge me $130 for parts and labor. $30-$40 for the belts that they have to drive around and find then $100 labor. Does this sound reasonable? I ask because I could do it myself but have no clue where to start or if I have the right tools. How hard is a job like that?
 
I don't think changing a belt is that hard, and I'm not the world's greatest wrencher. At least try it before handing over 130 bones to a stealership.

Good luck.
 
mdjohnsen said:
Where do I start? Where are the belts? In the box itself? Do I need special tools?


could be in trouble.











open the hood theres a latch you should be able to find it, look behind the radiator and there should be some slim licoroce looking things, those are the belts take em off go to parts store have them give you same ones and then replace and close hood and drive:cheers:
 
if you really don't know how to change a power steering belt you need to get yourself a manual dude... it will save you alot of damn time. read it over and over and you'll start to understand how the mechanics of the vehicle will work and you won't be so confused because it seems like your in the "blue" on alot of questions you ask.... get a factory service manual and just study it, everything will come to you if ya give it some effort...instead of getting a little bit of diferent information from each individual on this site you'll be able to know exactly what to do.
 
not that hard - and MUCH cheaper to do yourself.

no, the belts are what you see when you look into the engine compartment. you need to get the right size belt(s) - you might be able to get the number of the belt off the belt itself, or have toyota tell you the number or take the bad belt(s) into a local Napa or Pep boys type place to get a match. I believe, for your power steering, it is 1 belt, but they may be wanting ot replace that and the fan/alternator belt while in there as they will need to remove that as well.

you would need socket set, wrench, some time and likely a breaker/pry bar to help get the alternator snug - and it's belt - after you remove it to get to the power steering belt.

UPDATE: looks like cam, bandy and I all posted at same time on top of each other :) - but Bandy has it, get the manual as they are worth the $$ - the money you save doing this fix could buy that manual :)
 
Well, I looked into a manual but unfortunately practically most of the LC is parts from other vehicles. I looked into buying a manual before I even bought the LC. Then before I had the chance I found out all the different components. You guys are talking about the fan/serpentine belt. I thought there was some crazy belt in the p/s box itself. If that's all I need geezus I could do it myself.
 
mdjohnsen said:
Well, I looked into a manual but unfortunately practically most of the LC is parts from other vehicles. I looked into buying a manual before I even bought the LC. Then before I had the chance I found out all the different components. You guys are talking about the fan/serpentine belt. I thought there was some crazy belt in the p/s box itself. If that's all I need geezus I could do it myself.

Chevy V8s have belts just like Toyota 2Fs do. And every other engine. Take the belts off. Take them to a parts store. Get new belts. Put new belts on.
 
Pin_Head said:
Pay the money.
ditto...

but make them show you exactly what they replaced and explain why it was such a problem for them (because it was NON-Toyota I assume)
It will get you back on the road and motivate you to start learning what everyone above is talking about.

Find a local club and start hanging out with 'those that know'

You can learn, you just need to start. Also, the manual they are talking about is a service manual, not an owners manual (although they sometimes have that info also... although useless if you have GM stuff in there)
 
Pay the money.

Then sign up for a general automotive maintainence course at the local Community Collage or trade school.

I'm no mechanic but over the years I have saved a considerable amount of time and money doing stuff myself. More than enough to pay for the tools I own. Plus I can do many repairs in less time than I would spend dropping off and picking up a car from the shop.

You would probably recover the expense of a class within the first year.

You want a course that will cover;
Battery maint.
Oil change/ Lube
Belt and hose replacment
Coolant system maint.

If you stay up on these things it will save you a lot of repairs to begin with.
 
when you purchased the fj40 you should have known you had two options..


1. learn to do most of the work and maintainence yourself...
2. have the money and pay someone to do it....


these things are something i would def. think about when purchasing a vehicle, especially purchasing a very old, very modified one like you did..
 
bandy rooster said:
when you purchased the fj40 you should have known you had two options..


1. learn to do most of the work and maintainence yourself...
2. have the money and pay someone to do it....


these things are something i would def. think about when purchasing a vehicle, especially purchasing a very old, very modified one like you did..
We learn by doing, that is doing stuff and making mistakes.

Most who purchase an older vehicle, of any description, for the first time don't realize what they are getting themselves into.

Now if mdj comes back in six months telling us he bought another Cruiser and can't find the dip stick I say we flame him to a golden brown. :grinpimp:
 
kind of surprised some of you guys are telling him to pay the $$

personally - I think he should go for it on this one. it is just at that difficulty level where there are multiple steps to follow (and then put back together), but not so crazy difficult it can't be pulled off at a pretty basic user level. hell, if he does not start somewhere, then when?
 
The drive home from the dealership will be tough without Ps.

The Dealership will probably charge him a $100 asessment fee

Ps on a 72 is NOT going to be anything stock.


Actually, I think that $130 is not a bad price all things considered..
 
I initially got my 40 because I loved them, but I also had the motive of wanting to learn how to restore the vehicle and learn general mechanic work.

If you desire to learn to maintain your own vehicle, go for it. It is a relatively easy job to do and it will get you used to the feeling of taking something apart and not knowing if you will get it back together. It will also be beneficial by getting you under the hood looking at all of the components. Who knows, you might find something else that needs to be done or that you want to do. (One of my projects always leads to another for some reason;) )

This is a great board and if you get stuck, there are plenty of people her that would be willing to help you out.

If you can't get it back right, then you can always pay someone to do it.

If you desire to only drive the vehicle because you love it, but have no desire to become mechanically inclined, then pay someone else to do it and be happy driving it.
 
mdjohnsen said:
Well, I looked into a manual but unfortunately practically most of the LC is parts from other vehicles. I looked into buying a manual before I even bought the LC. Then before I had the chance I found out all the different components. You guys are talking about the fan/serpentine belt. I thought there was some crazy belt in the p/s box itself. If that's all I need geezus I could do it myself.
Make sure you don't drag the belts across the radiator fins reducing the flow through the radiator. If you have a fan shroud and have never replaced belts before, I would recommend that you remove the bolts holding the fan shroud to the radiator as it will make it easier to take off the old belts and put the new ones on. Make sure you do not tighten the belts with too much tension. You should be able to easily get 3/4" of motion at the longest run from one pulley to the next. If you have a friend that has experience doing this you might want to ask for their assistance so you can see how to do it.
 
Back
Top Bottom