Powersteering

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

well, good question.
if you DO have a Toyota box, Toyota's take ATF Dextron II or III.
I'm not sure what saginaw systems use. I put ATF in mine

Anyone know what Saginaw steering calls for?
 
mdjohnsen said:
Hampton, Virginia. There are just a bunch of ghetto sleds up here. No LCs.

AH!

However! there are some GREAT cruiserheads within reach of you!
BBRC (Bay to Blue Ridge Cruisers) and CLCC (capitol Land Cruiser Club)
BBRC HERE on mud
CLCC HERE on mud

Also my good friend (So I'm afilliated in that way) owns Iron Pig Off Road right up the road from you in Fredericksburg!

And I know for a fact that some of the BBRC guys are in Richmond.

Lot's of resourses.... just not so many right down there in the bay.
 
mdjohnsen said:
What type of PS fluid do you recommend for that model pump?


i use 1/3 water and 2/3 10w-30.
 
Ok. So, drained the pump, topped all my fluids off, and there is still a f'n grinding when i'm pulling into a parking space or pulling out turning my wheel. This all started when I changed out the belts. It was a physical affair because the bracket that the pump was on was old and the slide bolt wouldn't move for anything so.....yes I banged around a bit. It wasn't as bad as it sounds. Do I need a new pump?
 
Here are some pics I took of my powersteering setup. I'm not sure what model the pump is but it looks like a Saginaw maybe?? The gearbox?? Toyota?? Anyways, I was reading that if one of the lines are touching something they can give me the grinding i'm getting.

pump_side.webp

pump_top.webp

ps.webp
pump_side.webp
pump_top.webp
ps.webp
 
Thanks, man. I guess i'll find out tommorrow because i'm taking in the old brake shoes from the rear axle to have them swapped out at Napa. Then i'll finally know what kind of mutt truck I got.
 
Back
Top Bottom