Post McGrew 2010
- Thread starter retrofive
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Pics
Thanks again, had a great time!
Thanks again, had a great time!
dILzNAK
WORD
- Joined
- Jan 22, 2009
- Threads
- 35
- Messages
- 1,603
- Location
- Southern Oregon
- Website
- www.fjcruiserforums.com
Good times, good times!!!
A shot of Jeremy from Rivertown, Josh and me giving 2 thumbs up on how unbelievable the water is at Sourdough 
dILzNAK
WORD
- Joined
- Jan 22, 2009
- Threads
- 35
- Messages
- 1,603
- Location
- Southern Oregon
- Website
- www.fjcruiserforums.com
Thats a Nice shot of Jeremy, and Josh! But that last one..... 
LuckyPighead checking in. From Sacramento this time. Left Medford at 9 or 10 (got lost in Medford looking for I5...) and got in to Sac just in time for the rush hour.
I had picked up a couple powersteering belts at the same napa where we got Sue's knucklestud nut. Put one on there and it worked all the way home.
This was the first trip of any length since I got the 37s, and the 4.88s, and a well-balanced driveshaft...'Cruised easily at 2800 RPM (63.1 MPH according to the cheat sheet I taped by the tach...) occasionally took it up to 3K or 3100 (70ish!) as I approached hills.
Actually, there was a hill on the drive from GP to Medford, where a little red foreign POS was trying to pass me and there was a truck up ahead of me that I did not want to slow down for. So I put the hammer down, out-accelerated the red POS, and was able to pull in ahead of it to pass the truck. On an up-hill... I was very pleased.
I'll tell you guys, that is a cute little trail you got there, and a fabulous campground, and a top-10 worldwide swimming hole (the far one). That was one swell run, and it wasn't just the winch (TYVM though). There are several runs that I just will not miss: Rubithon, Surf&turf, Georg's 45 run...I think McGrew just made my list.
Thanks again,
Pighead
I had picked up a couple powersteering belts at the same napa where we got Sue's knucklestud nut. Put one on there and it worked all the way home.
This was the first trip of any length since I got the 37s, and the 4.88s, and a well-balanced driveshaft...'Cruised easily at 2800 RPM (63.1 MPH according to the cheat sheet I taped by the tach...) occasionally took it up to 3K or 3100 (70ish!) as I approached hills.
Actually, there was a hill on the drive from GP to Medford, where a little red foreign POS was trying to pass me and there was a truck up ahead of me that I did not want to slow down for. So I put the hammer down, out-accelerated the red POS, and was able to pull in ahead of it to pass the truck. On an up-hill... I was very pleased.
I'll tell you guys, that is a cute little trail you got there, and a fabulous campground, and a top-10 worldwide swimming hole (the far one). That was one swell run, and it wasn't just the winch (TYVM though). There are several runs that I just will not miss: Rubithon, Surf&turf, Georg's 45 run...I think McGrew just made my list.
Thanks again,
Pighead
dILzNAK
WORD
- Joined
- Jan 22, 2009
- Threads
- 35
- Messages
- 1,603
- Location
- Southern Oregon
- Website
- www.fjcruiserforums.com
LPH, (<--- I like that) I also am Very glad to hear that you made it home to Sac town safe and sound!!! I Truly hope to see you again...
2ndGenToyotaFan
Moderator
- Joined
- Jan 8, 2006
- Threads
- 264
- Messages
- 9,805
- Location
- Ashland, OR
- Website
- www.jeffersonstatecruisers.com
What's up with the birf party? Is it a for sure thing? Cause I have a friend that needs the treatment as well, May as well get them all over with at once! Who's in?
I hear there's a thread about it in the members section...
birfield
Yes, this is a for sure thing happening @ 2320 Parkhill Place. Plenty of beer and pizza for all that show up. Need to redue both birfield, front axle.
Yes, this is a for sure thing happening @ 2320 Parkhill Place. Plenty of beer and pizza for all that show up. Need to redue both birfield, front axle.
