pmc rubithon roll call
- Thread starter balls 2 claws
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Had a great time at the event and thanks to the FJ's on the trail for making life easier this year. I retract my prior comment.
Oh yeah after the helicopter ride decided, I gotta have one, think some body wants to trade for one? What a blast, totally new experience. All I saw was smiles getting off the copter from everbody. Coolness.
See ya at the swap meet.
Oh yeah after the helicopter ride decided, I gotta have one, think some body wants to trade for one? What a blast, totally new experience. All I saw was smiles getting off the copter from everbody. Coolness.
See ya at the swap meet.
My Sector shaft is twisted, my steering goes WAAAAYYYY right, which bent the ears on the knuckles, which let the tire rub on the springs, whcih tweaked the shackle, the jam nuts came off, and the threads got wasted on the shackle. The shock on the driver side tore aprat, probably because the tie rod/drag link dented the shock tube.
Additionally, the electric fuel pump was losing it's prime. This is the 4th electric. So I'm going back to a mechanical pump.
Additionally, the electric fuel pump was losing it's prime. This is the 4th electric. So I'm going back to a mechanical pump.
Survived another Rubithon and even managed to keep the rubber side down this year. Although all 4 wheels were not always touching the ground at the same time. Jerod Knox road with me for his first trip on the Rubicon and I even let him drive a little.
Went in on the Wednesday Wentworth Springs run. First time through this area and it was a lot of fun. Once to the Springs camped out with many of the PMCer's that were in attendance near to the Event area. Nice camp area and a short walk to the event activities. Many other PMCer's dropped by and spent some time around the Campfire. Good times.
Attached are some of my pictures from the event. You will see quite a few PMC members working the event. Tony Twiddy, the event Chairman manages to bring in all his friends to help at the event, but he knows we are glad to help, even Jeeper Ron who ended up lending a hand bringing in a group of Trucks on the Thursday Straight Through run and then splitting off from his group to get parts for Big Jim Adams.
Now for a few pictures. Only a few wheeling pictures of me are included at the post pile as some one else had my camera for a while.
The pictures out cadillac hill was at one of our resting stops while Mudrak was working his tail off fixing 2 trucks that broke knuckle studs back to back.
Other than that the exit went well although I broke a badly installed brake line to my line lock trying to keep up with Tony after observation point.
Thanks again to Paul Decker for all of the steel protection that he has built and installed on my rig. It was once again heavily trail tested.
Went in on the Wednesday Wentworth Springs run. First time through this area and it was a lot of fun. Once to the Springs camped out with many of the PMCer's that were in attendance near to the Event area. Nice camp area and a short walk to the event activities. Many other PMCer's dropped by and spent some time around the Campfire. Good times.
Attached are some of my pictures from the event. You will see quite a few PMC members working the event. Tony Twiddy, the event Chairman manages to bring in all his friends to help at the event, but he knows we are glad to help, even Jeeper Ron who ended up lending a hand bringing in a group of Trucks on the Thursday Straight Through run and then splitting off from his group to get parts for Big Jim Adams.
Now for a few pictures. Only a few wheeling pictures of me are included at the post pile as some one else had my camera for a while.
The pictures out cadillac hill was at one of our resting stops while Mudrak was working his tail off fixing 2 trucks that broke knuckle studs back to back.
Other than that the exit went well although I broke a badly installed brake line to my line lock trying to keep up with Tony after observation point.
Thanks again to Paul Decker for all of the steel protection that he has built and installed on my rig. It was once again heavily trail tested.
Last edited:
More pictures
Knorr's and Clint in teh bottom picture. Trying to run the trail backwards on Wednesday. They stopped to have lunch while everyone went by them.
Knorr's and Clint in teh bottom picture. Trying to run the trail backwards on Wednesday. They stopped to have lunch while everyone went by them.
Last edited:
More again
More more
and even more
yet more
Now why didn't I just post them somewhere else
Last edited:
Yes even more...
Registration booth
Registration booth
Last edited:
Cindy Twiddy and Dion at the booth
Now Ben did not originally sign up to bring this gal in did he?
Mudrak at one of his several Raffle ticket purchases
Now Ben did not originally sign up to bring this gal in did he?
Mudrak at one of his several Raffle ticket purchases
Last edited:
Many more Pictures
PMCer's at work and Ron checking the air in his tires during our ride up Cadilac hill.
Michael Thanks again for all of your help with the raffle. I would have been lost with out it. Jerod thanks to you as well it made a huge difference having your help this year as well.
PMCer's at work and Ron checking the air in his tires during our ride up Cadilac hill.
Michael Thanks again for all of your help with the raffle. I would have been lost with out it. Jerod thanks to you as well it made a huge difference having your help this year as well.
Last edited:
Yes even more
Last edited:
the last of them for now
James coming around the corner to find all is stopped for a good hour.
Bottom is James and Amy
James coming around the corner to find all is stopped for a good hour.
Bottom is James and Amy
Last edited:
