Plastic fuel line (1 Viewer)

[pardion]

I can't find the thread on replacing old fuel line with new. Thank's in advance. John

 

[nuclearlemon]

https://forum.ih8mud.com/threads/fuel-lines.47460/

 

[pardion]

https://forum.ih8mud.com/threads/fuel-lines.47460/

Mabye Mcmaster Karr has changed stock? I don't see any line to fit 1/4" ID and 7/16"-1/2" OD And Ige for doing the legwork, how many of those T-shaped felt clips do you need. Thank's, John

 

[nuclearlemon]

i'm missing two...do you have spares?

 

[nuclearlemon]

looks like for 7/16 od, you have to go with 5/16 id, and for 1/2 od, 3/8 id


btw, this is entirely too much technical stuff posted here, please don't let the 80 guys know i have access to this...they'll eat it up

 

[pardion]

looks like for 7/16 od, you have to go with 5/16 id, and for 1/2 od, 3/8 id


btw, this is entirely too much technical stuff posted here, please don't let the 80 guys know i have access to this...they'll eat it up

I'm going to still look for some 1/4" ID X .45"OD Clear fuel tubing.

 

[63cruiser]

I'm going to still look for some 1/4" ID X .45"OD Clear fuel tubing.

Going back a few years but did you ever find the clear tubing? I did find this. https://www.ebay.com/p/171140286. Not quite .45" OD but pretty close. It is 1/4" X 7/16" but my current fuel line is connected and brittle. I am afraid tthat i may break the line if I take it apart to measure the ID/OD's. @ClemsonCruiser looks like you have used the yellow tubing. What was the ID/OD on that?