DId you end up using the Scratch Paint product? Im still confused why more people arent willing to spend the extra mile (1-2 hours) instead of 20-30 minutes on these dime size or smaller areas and then applying clear coat beyond the actual repair area and doing a fine 2500grit wet sand to smooth things out and then a quick buff to get the wet sand out and it should significantly reduce the chances of peeling in that immediate area right? I feel like you see people who had one area of peeling, covered it with vinly or the sort and many of them end up with no peeling in another place for 1-2 years. If you were able to do this right when things started, depending on where your car is stored etc, it might be possible to get many years of no significant peeling if you are willing to do each touchup correctly so that the clear coat extends beyond the actual chip/peel area and then blended in with really fine wet sanding.No update. The spot by the headlight hasn’t gotten worse, fortunately. Ended up focusing on other mods, and may reconsider my options when / if it gets worse.
Did you end up doing any of these temporary things? (not necessarily my method, but temporarily fixing the peeling areas and it didnt get worse?)