Parting Out Parting out a Running 89 FJ62 w ARB Bumper & 189k Miles in New Jersey

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

FJ40 MATT

SILVER Star
Joined
May 14, 2009
Threads
740
Messages
7,577
Location
Brick, NJ
Vehicle Model
  1. 60 Series
Hey I’m going to start parting out a 89 FJ62 this weekend that runs and drive but has no brakes. All “4” windows go up and down with their switches on the door and the main switch panel on the driver door. The front wipers work well and so does the rear wiper motor work on both speeds. The dash pad, dash, front & rear plastic seat belt covers, and door panels are all in good shape. The frame is bad and most of the body panels are as well. If you need a part or have a question just let me know

Truck & parts are in New Jersey

Parts below have sold already

- Dash bezel
- Dash Pad
- Front & Rear window motors and regulators
- Brake Pedal
- Front Grill, turn signals , bezels , marker lights
- Front Wiper motor
- Front Driveshaft
- Transfer Case
- rear bench seat
- arb bumper
- stock front bumper
IMG_4491.jpeg


IMG_4493.jpeg


IMG_4494.jpeg


IMG_4492.jpeg


IMG_4490.jpeg


IMG_4489.jpeg


IMG_4488.jpeg


IMG_4496.jpeg


IMG_4497.jpeg


IMG_4495.jpeg
 
Last edited:
Interested in the cylinder head if you separate.
Going to try to sell the engine all together for now, but if something changes I’ll reach out. Have a good weekend

IMG_4524.jpeg


IMG_4526.jpeg


IMG_4525.jpeg


IMG_4527.jpeg


IMG_4516.jpeg


IMG_4514.jpeg


IMG_4515.jpeg


IMG_4523.jpeg
 
  • Like
Reactions: LCS
How is the driver side mirror?
Needing the back panel that holds the glass to the mounts.
Interested in both side mirrors if the chrome is not delaminating.
 
Last edited:
interior mirror (if no sun rot)
front fender and rear pillar vents ( if uncracked and nice)
Rear lift gate lock pad
Gas door cable from handle to release pin
Thanks in advance
 
interior mirror (if no sun rot)
front fender and rear pillar vents ( if uncracked and nice)
Rear lift gate lock pad
Gas door cable from handle to release pin
Thanks in advance
Will see what shape the parts are in when it cools down later

IMG_4631.jpeg


IMG_4633.jpeg


IMG_4634.jpeg


IMG_4626.jpeg


IMG_4624.jpeg


IMG_4625.jpeg


IMG_4635.jpeg


IMG_4634.jpeg


IMG_4633.jpeg
 
Engine pictures

IMG_4499.jpeg


IMG_4502.jpeg


IMG_4501.jpeg


IMG_4500.jpeg


IMG_4502.jpeg
 
Last edited:
Will see what shape the parts are in when it cools down later
As long as the mirrors are not wobbling like a leaf in the wind, they should be good. I have good hardware to cobble together the workings. It's the shell and the mirror backing that I am most interested in.
Thank you
 
As long as the mirrors are not wobbling like a leaf in the wind, they should be good. I have good hardware to cobble together the workings. It's the shell and the mirror backing that I am most interested in.
Thank you
Sent you a message

IMG_4509.jpeg


IMG_4510.jpeg


IMG_4508.jpeg


IMG_4511.jpeg


IMG_4512.jpeg


IMG_4513.jpeg


IMG_4506.jpeg


IMG_4505.jpeg


IMG_4507.jpeg
 
Driver side fender

IMG_4518.jpeg


IMG_4517.jpeg


IMG_4520.jpeg


IMG_4519.jpeg


IMG_4532.jpeg


IMG_4533.jpeg


IMG_4536.jpeg


IMG_4521.jpeg


IMG_4522.jpeg
 
interested in
1. the plastic cover for seat belt retractor on rear seat passenger side
2. both long plastic cream trim pieces where rear seat back latches
3. cigarette lighter part that pulls out (not whole assembly)
4. both front door speaker grills
5. fusible link at the battery if it works

sent pm.
thx.
Dave
 
Interested in the rear speakers. Including the grills, screens and mounting bases. Also the head light surrounds of chrome is not bubbling.
 
interested in
1. the plastic cover for seat belt retractor on rear seat passenger side
2. both long plastic cream trim pieces where rear seat back latches
3. cigarette lighter part that pulls out (not whole assembly)
4. both front door speaker grills
5. fusible link at the battery if it works

sent pm.
thx.
Dave
Thanks Dave sent you a message back
 
Interested in the rear speakers. Including the grills, screens and mounting bases. Also the head light surrounds of chrome is not bubbling.
Hey I have to see if the speakers work and will let you know. I think the chrome is bubbling around the headlights

IMG_4573.jpeg


IMG_4574.jpeg


IMG_4575.jpeg


IMG_4576.jpeg


IMG_4577.jpeg


IMG_4578.jpeg


IMG_4579.jpeg


IMG_4580.jpeg


IMG_4565.jpeg


IMG_4567.jpeg
 
interior mirror (if no sun rot)
front fender and rear pillar vents ( if uncracked and nice)
Rear lift gate lock pad
Gas door cable from handle to release pin
Thanks in advance
Has it cooled off yet ??
 
I interested in the housing mounting the speakers if the speaker are back. There is also a short pigtail going to the speaker. About six inches long to a special plug..
 
I interested in the housing mounting the speakers if the speaker are back. There is also a short pigtail going to the speaker. About six inches long to a special plug..
No problem I’m going to test them when I get home for you another guy who asked about them the other day

IMG_4604.jpeg


IMG_4605.jpeg


IMG_4606.jpeg


IMG_4607.jpeg


IMG_4608.jpeg


IMG_4610.jpeg


IMG_4609.jpeg
 

Users who are viewing this thread

Back
Top Bottom