Parting Out 1/90 FJ62

[mwilley]

I am parting out an early model 1990 Land Cruiser. The body on this rig is very good. It was equiped with electric windows, however, I am not sure what is all there because some stuff was parted out before I got it. Automatic Transmission. NO Transfer Case or front driveline.

The 6-Cylinder engine had a blown head, which did not come with the rig. I am assuming the block is still good. The fuel injection system was taken off the engine before I got it. There are still misc engine components there.

I am keeping the front axle, rear leaf springs, and brake booster and master cylinder. Everything else is open for business. I don't really want to ship the larger body parts because they are rather large. I will have pictures posted tomorrow evening, but thought I would give time for you guys to think this over.

If you are interested in something please email me at willey555@hotmail.com.

 

[landcruiserman]

parts

I sent you a pm and a email.

Thank you

 

[landcruiserjunky]

I just busted my passenger mirror AGAIN, I'm interested in both if you got them.

 

[jp_waltz]

pm'd you with a few item requests

 

[sk8salomon]

do you have the oil cooler? Should be lower RH side of engine.

 

[jp_waltz]

your pm box is full. Here is a list of what I am looking for.

I have a few parts that I am in want of. The list is as follows:
1)Radio brackets(the ones that screw into the radio)
2)Heater/AC control relay.(it screws into the heater box almost at the drivers right toe when on the gas.) I can give you more info if you need it.
3)PS front bumper end cap
4)DS rear bumper end cap

I think thats it for now. If you could give me prices for these items shipped to 93003 I would greatly appreciate it.
Thanks,
Paul

 

[v8tuff]

PM Box is Full.

Hi, looking to pick up the front left (drivers) quarter panel if it is straight and rust free, and the same for the rear driver's side, but that one will have to be cut. I recently had a junkyard get me the passenger rear and it wasn't a big deal, about a half hour with a sawzall. Anyway, let me know and I'll come up to get them. Thanks, Kevin

 

[Dynosoar]

Hi I am looking for a power mirror switch and the plug from the harness for it as well as the mirror connections in the doors just the plugs and a bit of the wire.

Please PM me with a shipping price to 93065

Thanks

Dynosoar

 

[mwilley]

I am going to get some pictures up in a second. I just want to let everyone know that I am in college so I am only going to be available to pull parts on the weekend. The rig is at my parents house which is about 40 minutes away. But I will be sure to get to all of your requests and in a timely manner.

BTW, if my PM box gets full just email me at: willey555@hotmail.com. I check that regularly as well.

 

[mwilley]

 

[mwilley]

PM Box is Full.

Hi, looking to pick up the front left (drivers) quarter panel if it is straight and rust free, and the same for the rear driver's side, but that one will have to be cut. I recently had a junkyard get me the passenger rear and it wasn't a big deal, about a half hour with a sawzall. Anyway, let me know and I'll come up to get them. Thanks, Kevin

Driver Fender---$80 (The only thing that makes it not perfect is the small dent in it, but as you can see on the picture it isn't even anything)
Rear Quarter Panel---$75 (You-Cut. I dont know where to start, I will clear everything out of the way and you can bring your saw and cut it yourself, that way it will be how you want it)

 

[mwilley]

do you have the oil cooler? Should be lower RH side of engine.

The oil cooler is part of the filter assembly on the 3F correct?

 

[mwilley]

The oil cooler that I see is attached to the side of the engine and is also the oil filter assembly. If that is what you want, it is $30 + Shipping

 

[Iceman25th]

E-mail sent.

 

[slcfj62]

Looking for the skid plate under the radiator and the skid plate under the transmission + any bolts, brackets, etc.

 

[slcfj62]

Also looking for the drivers side front brake backing plate, it has a fiberglass air scoop on it.

 

[dallen341]

Looking for e-brake cables and linkage from backing plates to the cab (excluding the e-brake handle assembly).

Price shipped to 92626

Don

 

[mwilley]

Also looking for the drivers side front brake backing plate, it has a fiberglass air scoop on it.

I am keeping the front axle complete

 

[szydirect]

Hi , I would like
- Rear passenger upholstered door panel
- Rear pass plastic door entry floor trim that covers the carpet
- Rear passenger side plastic door pillar cover that covers the seat belt
- Ashtray
- 2 Headrests
- 2 Plastic covers where the windsheild wiper and hood meet
- Dash Instrument panel (covers the speedo, tach etc )
How much for all shipped to Houston, 77036 thks

 

[szydirect]

Hi , I would like
- Rear passenger upholstered door panel
- Rear pass plastic door entry floor trim that covers the carpet
- Rear passenger side plastic door pillar cover that covers the seat belt
- Ashtray
- 2 Headrests
- 2 Plastic covers where the windsheild wiper and hood meet
- Dash Instrument panel (covers the speedo, tach etc )
How much for all shipped to Houston, 77036 thks