ORION HD Lookie Lookie (1 Viewer)

[fj40_73]

Orion HD e-brake!



http://www.pirate4x4.com/forum/showthread.php?t=601855

yeah, but problem with AA crossmember that suports the back of the drivetrain.

Jesse at highangledriveline is currently working with a guy, in I think new york, to get around this.

I hope he dose, because I want one for my HD, I should have in a couple weeks.

 

[Sputnik40]

Close to pulling the trigger on this - going with twin stick, the electro speed sensor and Jesse's e-brake kit and flanges I hope.

Can anyone tell me any offset difference between the stock from nose cone and flange and the Orion HD nose cone and flange - e.g. how will this effect driveshaft as Orion HD looks a little shorter?

Waiting to hear the same for the rear from Jesse with his e-brake kit installed. I built a beefy as all get out skid plate and the supports are wrapped around the drum brake - any differences are gonna require some major cutting to a sweet skid plate.

 

[fj40_73]

so i measured my old TC and the orion HD sitting on my cruiser.

Nose cones only,

Orian HD - about 5"

73 tc - about 7"

 

[Sputnik40]

Thanks - that's what I thought I was seeing from the pics from AA - just wanted to make sure. I think I've got enough spline on the long travel front to work around that - the rear is a little more critical - waiting on a reply from Jesse about his disc brake, etc.

 

[cavsfj40]

congrats on your HD

Does anyone know what the front engagement on an HD looks like?

still can't believe what our stock 3spd xcases have

It looks like you have 3 hands in this picture!