Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I’ve seen the threads suggesting weed eater line. But it seems nonsensical to have to repeatedly, periodically stick things in these openings to keep them draining.
I’ve tried every one of these feeler gauges that are stiff enough, and cannot get them in. Just seems to me there is little downside to splashing some primer around, and opening these slits so they drain 24/7/365, not once every few years with plastic wire.
Am I missing the big picture ?
Although I cleared mine, I still like having the drain hoses rerouted through the floor plugs, which still fit behind the plastic footwell trim. I don’t know how well the stock plugs seal in the first place if you get into deep enough water, but if one wanted to do this, it would be easy to create a waterproof seal, as the hoses are only barely smaller than the hole.
View attachment 2805913
Alright, thanks for the info. Will look into that.No extension on mine. Stock hoses have enough slack & come down about 1.5” through the hole, just don’t pull ‘em too hard. They seem to hold their self in place well enough, as mine haven’t moved.
Did this to my 105 series.i solved that problem (well PO did) and cut rocker off and put slider in its place.
View attachment 2806448