Official ONSC member buying/selling thread (15 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
No affiliation.
I was on my way back from Mooresville today and passed by this 4runner for sale. I took some pics in case anyone is interested. This 4 runner is located on Hwy 3, near Odell School Road in Concord.
I did not speak with anyone. It's located at an old farm house and the for sale sign asks that you not knock on the door of the house.
I looked at the frame as much as I could without crawling under it and the frame is in great shape, the front is almost pristine, the rear has some surface rust but nothing out of the ordinary for the year. I would say its in great shape for the year.
It appears to have been painted. The base color is white with a slight pearl in the clear coat. It looks good, but I don't think Toyota had a pearl in that year. I did not see any obvious over spray. There are a few scuffs here and there.
The tires have plenty of wear left, I did not check the born on date. The wheels look brand new.
The interior looks good from the outside, I did not open the doors.
The top appears to be in good shape.
I don't know the market on these 4runners, decide for yourself about the price. I will say that if you are in the market for one of these you could do A LOT worse.
I was on my way back from Mooresville today and passed by this 4runner for sale. I took some pics in case anyone is interested. This 4 runner is located on Hwy 3, near Odell School Road in Concord.
I did not speak with anyone. It's located at an old farm house and the for sale sign asks that you not knock on the door of the house.
I looked at the frame as much as I could without crawling under it and the frame is in great shape, the front is almost pristine, the rear has some surface rust but nothing out of the ordinary for the year. I would say its in great shape for the year.
It appears to have been painted. The base color is white with a slight pearl in the clear coat. It looks good, but I don't think Toyota had a pearl in that year. I did not see any obvious over spray. There are a few scuffs here and there.
The tires have plenty of wear left, I did not check the born on date. The wheels look brand new.
The interior looks good from the outside, I did not open the doors.
The top appears to be in good shape.
I don't know the market on these 4runners, decide for yourself about the price. I will say that if you are in the market for one of these you could do A LOT worse.
Yep...the 'holy grail'
Solid front axle and EFI (and manual trans)
Solid front axle and EFI (and manual trans)
WTB - Tuffy Console for a 40 w/ radio compartment
I presume a 6-7inch model is what I need. Would ideally like cup holders also, but not a requirement.
Starting to prep to remove hardtop in the spring.
Pls PM me if u have any local leads.
I presume a 6-7inch model is what I need. Would ideally like cup holders also, but not a requirement.
Starting to prep to remove hardtop in the spring.
Pls PM me if u have any local leads.
Last edited:
Anyone want my old medical kit?? it's served me well for quite a while. Finally transferred all the stuff to my roto pax.
its pretty compact, sat under my seat in the 80, but swallowed everything I have pictured in the roto pax easily.
its pretty compact, sat under my seat in the 80, but swallowed everything I have pictured in the roto pax easily.
I'll take it if someone's headed toward Raleigh or Uwharrie soon. I'm thinking it will work well on the wall in the garage.
its yours if you can find someone really soon. I'm leaving on the 1st.
Or maybe there is someone in charlotte that will come grab it and hold if for you?
Or maybe there is someone in charlotte that will come grab it and hold if for you?
forrest5000
SILVER Star
I'm going to try to make work day I can get it uwharrie
Thanks and if it doesn't work out no problem.
Eric, if you don't mind holding it I don't think I can make this weekend but I'll be at the Christmas party if we don't catch up before then.
RedHeadedStepChild
Proudly wearing my MC1R mutation!
Eric needs to start charging storage fees... well, maybe after I pick up my crap anyway.
SOLD - 6x12' V-Nose enclosed Look Trailer, model EWLC6X12SI2, bought new April, 2012. Drop gate and side door. Priced to get out of the way for $900.00. Has a small leak at the top of the V that I have not repaired. Once I found the leak (within a couple of weeks) I have had it covered with a tarp. Pics to show where water came in. Not dry rotted - just discolored. Can take more pics with tarp off, but just moved so I could empty it. Located near Boone, NC
Last edited:
For sale sound deadener.
I have 15 sq/ft of damplifier
and 38 sq/ft of cruiser crap
and 1 gallon of spectrum.
and the roller to aplicate the sheets
and a sheet of luxury liner pro
Retail for all this would be over $250
sell for $80 obo.... would be enough to do an 80..... Just never got around to it.
I'll get a pic of the luxury liner tomorow.... pm or post up if interested
20 ton harbor freight press...... Used maybe 10 times ...... Never failed to press anything out.
retails for $216
Onsc price $120
2 6 ton jack stands $40
Coleman peg board with frame and light for the back of a work bench. $50
will post up pics tomorrow
I have 15 sq/ft of damplifier
and 38 sq/ft of cruiser crap
and 1 gallon of spectrum.
and the roller to aplicate the sheets
and a sheet of luxury liner pro
Retail for all this would be over $250
sell for $80 obo.... would be enough to do an 80..... Just never got around to it.
I'll get a pic of the luxury liner tomorow.... pm or post up if interested
20 ton harbor freight press...... Used maybe 10 times ...... Never failed to press anything out.
retails for $216
Onsc price $120
2 6 ton jack stands $40
Coleman peg board with frame and light for the back of a work bench. $50
will post up pics tomorrow
Last edited:
fourtrax
SILVER Star
I have a couple things for sale
#1: Yaesu FT-2900RE almost new (purchased it about a month ago) hasn't need registered yet, still has factory warranty, 75 Watt Heavy-Duty 144 MHz (2Meter). just don't need two of them. $100.00.
#2: 3/8" Amsteel Blue synthetic winch lines. Comes with a 10 foot custom printed 'SOUTHEAST OVERLAND' abrasion guard, 10 foot drum wrap, spade connector terminal end and a hook on the other. I think it is about 90' never been used, decided to keep the steel cable on the winch. $200.00.
#3: 90' of 7/16" steel winch cable 15k rated, it was unspooled from a new Ramsey winch never used. $55.
#1: Yaesu FT-2900RE almost new (purchased it about a month ago) hasn't need registered yet, still has factory warranty, 75 Watt Heavy-Duty 144 MHz (2Meter). just don't need two of them. $100.00.
#2: 3/8" Amsteel Blue synthetic winch lines. Comes with a 10 foot custom printed 'SOUTHEAST OVERLAND' abrasion guard, 10 foot drum wrap, spade connector terminal end and a hook on the other. I think it is about 90' never been used, decided to keep the steel cable on the winch. $200.00.
#3: 90' of 7/16" steel winch cable 15k rated, it was unspooled from a new Ramsey winch never used. $55.
Last edited:
NCFJ
Supporting Vendor
Not affiliated
Lots of cheaper 80 series
1992 land cruiser fj80
1997 Toyota Land Cruiser Landcruiser
97 Landcruiser project
Not cheap, but valuable, says so right in the add
Valuable Toyota Landcruiser for Sale
Lots of cheaper 80 series
1992 land cruiser fj80
1997 Toyota Land Cruiser Landcruiser
97 Landcruiser project
Not cheap, but valuable, says so right in the add
Valuable Toyota Landcruiser for Sale
Last edited:
NCFJ
Supporting Vendor
I should unhook my trailer? 
NCFJ
Supporting Vendor
I'm teasing Dave
fourtrax
SILVER Star
I am looking for an exhaust y pipe 93-94 80 series. This is the pipe the rear of the cats connect to. Part# 17403-66010
