Official ONSC member buying/selling thread (8 Viewers)

[GarnerFJ40]

Free Replacement Burner

Anyone have a Charbroil gas grill?

I've got a replacement burner assembly you can have. I ordered a replacement part and they shipped the wrong one. They told me to keep it, so if you want it, let me know...

Part is 80010069 if you want to do a model compatibility search..


Edit: R.K. has spoken for it.....

 

[mtweller]

WTB: FJ40 4sp t-case shifter housing.

Long story, but I need the 4wd shifter housing for a 4spd case. You know, it bolts to the nose cone and houses the shift fork for front ds engagement. All my innards are good - just need the housing.

R

 

[uzj100]

Saw this on craigslist for the person looking for the 40.

1978 landcruiser FJ40 $5,000

 

[krzyabncanuck]

Long story, but I need the 4wd shifter housing for a 4spd case. You know, it bolts to the nose cone and houses the shift fork for front ds engagement. All my innards are good - just need the housing.

R

Ramon, if nothing closer i should have a good one you can have.

 

[Tym@work]

Free stock 80 springs....

If ya come and get 'em....

 

[mtweller]

Ramon, if nothing closer i should have a good one you can have.

Awesome Darin! Would you mind shipping on my dime? I don't know the next time I'll get down your way. I bet it wouldn't be too big a hassle for you to get by the Post Office

R

 

[krzyabncanuck]

Don't know man. Post Office lost a blackstone kit i mailed in.

I will work on getting it off this weekend and get it to you. Send me a pm and i will give you my Number.

 

[krzyabncanuck]

Anybody got any used 2.5 inch fj80 springs they need to get rid of ?

Want to see what this thing will look like.

 

[mtweller]

Don't know man. Post Office lost a blackstone kit i mailed in.

I will work on getting it off this weekend and get it to you. Send me a pm and i will give you my Number.

You rock Darin. No hurry, seriously! I have a lot of other issues to work our in tandem with this deal.

Unless some delivery person didn't get a transfer to the Hawaii branch, and is just storing all his route's mail in a storage facility, should be good to go Newwwwwman!

R

 

[krzyabncanuck]

I went to the Post Office it was mailed from and 2 days later it made it there.

Go figure.....

 

[Corgan]

Motor Mount Bracket

Where can I find a driver's side front motor mount bracket. Getting closer to finishing my 2f but am missing the front left bracket. Any suggestions would really be helpful.
Deuce

 

[southerncruiser62]

I think I have a bracket, may not be factory but I believe it's an Advance Adapters mount, let me know if you think it will work.

 

[Corgan]

I assume it would? I know nothing about it, can't seem to find where I would even buy one from? If you think it would work I am game. I have a 76 FJ putting a 77 2f engine in it. All stock so far.

 

[krzyabncanuck]

I only have the part that is on the frame itself. Do not think you need that though.

 

[R.K.]

Where can I find a driver's side front motor mount bracket. Getting closer to finishing my 2f but am missing the front left bracket. Any suggestions would really be helpful.
Deuce

I have a pair of new front motor mounts for an FJ40 - $20 for the pair.

 

[GarnerFJ40]

If Corgan doesn't need them, I need them....

Also, how different is the 1F bracket to the 2F bracket? I've got one of those... I think...

 

[R.K.]

If Corgan doesn't need them, I need them....

Also, how different is the 1F bracket to the 2F bracket? I've got one of those... I think...

I think they are interchangeable.

 

[mtweller]

I need a front DS FJ40 motor mount too. Square style.

Plus, who can tell me how to change one out w/o pulling the tranny and/or motor. T-Case is out right now and would prefer (really, really prefer) not to have to pull my tranny - AGAIN!

R

 

[shinton]

1989 Hooper Bobcat (Equipment) 5 Ton Trailer. It measures 16’ including the 2’ dovetailed section on the end. It measures 77.5” wide from frame to frame and the frame itself is built from the heavier 6” C channel!!

The axles are what is often referred to as Dexters, or “mobile home” axles, the front axle DOES have the brake equipment installed on it, but it has never been hooked up while we have owned the trailer. You can see the brakes in the included picture, and “what you see is what you get”, we have no idea what it will take to put them in service. The tires are in GOOD condition!

We are asking $1725 for the trailer, and we have the title in hand! Please call 336-644-6057 and speak with Sam if you have any questions or would like to see the trailer.

 

[Corgan]

Sent you a pm RK, yes I want them.