NCFJ
Supporting Vendor
Cheap 80, $1550.00, for someone looking for a potential swap vehicle, trans is on the way out
1992 Toyota Land Cruiser Classic
1992 Toyota Land Cruiser Classic
Official ONSC member buying/selling thread (9 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I thought that u were looking for inventory.
NCFJ
Supporting Vendor
I am, just bought an 80 and a 40' high boy shipping container. My budget is shot for a month or so
I am sitting here looking at one incomplete drawing and a photo of how the light mounts for a bumper "kit" for a 40. maybe 40-50 total pieces, no instructions and no packing list. I don't even know if it is all here or not.
I am sitting here looking at one incomplete drawing and a photo of how the light mounts for a bumper "kit" for a 40. maybe 40-50 total pieces, no instructions and no packing list. I don't even know if it is all here or not.
Cleaning out the garage......misc roof rack items.
Set of Thule HD Cross Bars with Foot Kit. 60" Long and universal feet mounting. Can be cut to desired length.
$100
Rola Vortex Extended Length Roof Basket - Universal Mounting Brackets - Dimensions 71"L X 40.5" W X 5" H
$150
Set of Thule HD Cross Bars with Foot Kit. 60" Long and universal feet mounting. Can be cut to desired length.
$100
Rola Vortex Extended Length Roof Basket - Universal Mounting Brackets - Dimensions 71"L X 40.5" W X 5" H
$150
what is the weight rating on the cross bars?
Not exactly sure but they are stout. My RTT was mounted on them (125lbs ish) and we slept in it several times with no issues. They are much stronger than the factory roof bars that they were mounted too on my LC ; )
You can see them in this pic with tent and awing on there.
that's a steal compared to most of the over inflated price those things normally go for.
jfz80
Cruisin’
Still needs more details and pics for that price..... And tent cot on top doesn't really add much value for me.
David70FJ40
Older Than Most
2002 Chrysler 300M 81,560 miles, great shape, all the options, bells and whistles. On Craigs List for $4750, offered here for $4200. Additional photos and information can be supplied upon request. This is the car my wife has been driving since we bought it and her medical condition is such that she isn't allowed to drive.
http://greensboro.craigslist.org/cto/5401362109.html
Additional photos and information.
http://greensboro.craigslist.org/cto/5401362109.html
Additional photos and information.
Sold!!... to me by SeanLX's friend Matt, who might be coming back out to an ONSC event...
Anybody got a 3FE throttle body collecting dust? Thinking of sending it off and having it bored for my 2FE, just to see if I can get a little more air down Dozer's trachea. I can tell this motor is begging for a turbo, but it's not in the cards for some time to come.
NCFJ
Supporting Vendor
Anyone have a set (4) of 1" spacers? I have a steel wheel I want to try and it will require a spacer for the rim to clear the caliper. The caliper sticks out past the WMS. Rims work fine on drums, still have to check rear calipers.
jfz80
Cruisin’
I do. For what rig?
They won't fit an 80 but came from a four runner so may clear semi float. Also believe they are 1.25"
They won't fit an 80 but came from a four runner so may clear semi float. Also believe they are 1.25"
NCFJ
Supporting Vendor
Why will they not fit an 80? Center bore too small?
Needs to be 107mm+
Needs to be 107mm+
jfz80
Cruisin’
Yes and no. A pic would describe best.
There is a lip on the outer edge of the bore that narrows down. It could be lathed off but shop equip setup fee is 75 bux alone here so it doesn't make since for me to make em fit.
4 Spidertrax 6 lug spacers. 1.25"
There is a lip on the outer edge of the bore that narrows down. It could be lathed off but shop equip setup fee is 75 bux alone here so it doesn't make since for me to make em fit.
4 Spidertrax 6 lug spacers. 1.25"
NCFJ
Supporting Vendor
Well that's a bummer. I need them to fit over an 80 front hub and also over a FF rear axle hub. 1.25" would work. I am not a fan of spacers overall but the wheels I want will not work without them.
Since there is a regular bolt pattern I wonder if you could chuck that spacer on a brake lathe and cut the hat down to size.
