NKG 52391 Spark Plug Wire Set

[arizona78]

I decided to replace the spark plugs and spark plug wires on my 1978 FJ40. 100% stock 2F engine, stock ignition, stock emissions, etc. I used the NGK 52391 wire set. They seem excessively long. Does anyone have experience with these spark plug wires? See pics. NGK in 1st photo. The old wires are in the 2nd photo. Not OEM (Belden) but assuming they’re close.

 

[charliemeyer007]

Wow exact fit to what? Are the ends glued, maybe you could trim them to actually fit. Like 40 years ago I bought some semi expensive blue ones, that are there still and working fine.

 

[Pighead]

I used these...

 

[devo]

Unacceptable!

 

[GA Architect]

Like @Pighead above: 1977 FJ40: NGK 8136 (RCTE92)

Not sure that coil wire is long enough.

 

[arizona78]

Thank you to everyone. Looks like I need the spark plug wires from P/N 8136 and the coil wire from P/N 52391. I have the igniter assembly mounted on the fender so it would appear that the one in P/N 8136 is too short. Appreciate all the responses!!!

 

[Green Bean]

Just for the sake of completeness to this thread, the OE plug & coil wire set is still available from Toyota. For our 1970, I recently replaced the plug and coil wires with 9091921017.