nicks 4runner (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Speaking of Them.... I found em on Low range's Site, there 19.95... anyone want 1 before I place my order (to save on shipping) ..... I will probably place the order this evening around 8 or 9ish

Fits a ton of models:

1979-1995 Toyota Pickup/Hilux
1984-2010 Toyota 4Runner
2007-2010 FJ Cruiser
1968-1972 Toyota Crown
1991-2009 Landcruiser
2001-2007 Toyota Sequoia
1986-1992 Toyota Supra
1993-1998 Toyota T100
1995-2004 Toyota Tacoma
2000-2004 Toyota Tundra
1991-1992 Toyota Previa (2TZFE Engine)
2003-2009 Lexus GX470
1996-1997 Lexus LX450
1998-2006 Lexus LX470
.
 
Jeeeez...................$33 each? That's too much money. Unless there is a huge difference I'm missing....? :meh:
 
Speaking of Them.... I found em on Low range's Site, there 19.95... anyone want 1 before I place my order (to save on shipping) ..... I will probably place the order this evening around 8 or 9ish

Fits a ton of models:

1979-1995 Toyota Pickup/Hilux
1984-2010 Toyota 4Runner
2007-2010 FJ Cruiser
1968-1972 Toyota Crown
1991-2009 Landcruiser
2001-2007 Toyota Sequoia
1986-1992 Toyota Supra
1993-1998 Toyota T100
1995-2004 Toyota Tacoma
2000-2004 Toyota Tundra
1991-1992 Toyota Previa (2TZFE Engine)
2003-2009 Lexus GX470
1996-1997 Lexus LX450
1998-2006 Lexus LX470
.

Jeeeez...................$33 each? That's too much money. Unless there is a huge difference I'm missing....? :meh:

SEE ABOVE.... There 13 bucks cheaper where I found em.. and from what I have found and decided its better to spend the extra 10 bones and do it once than have to do it again and again and .........


White people!
 
Damn, I'm not on the list!...........:frown:...............don't matter- no money anyhow!
 
SO..... I order the U-Joints last week, they cam in like wed.. decided to install this am.... UM YEAH....... There too fN big... WTF OVER? Sugestions please....
 
how much?
you double check part numbers?
maybe you have a jankey shaft he he :flipoff2:
 
yeah... good times.... I did some measuring Its about 1/16 smaller cap... I'm pretty sure it's a 1310 ... DAMN dana 60..... SO............ ANYONE need a Matsuba U-joint.... I have two for sale say 20 bucks each........ YES I understand that I purchsed them for 19.95 each but I paid about 50 bones for the 2 and shipping and 20 is a nice round number..... FML
 
this doesnt help much, but you should maybe get yourself a d60 to toyota flange and put the toyota joints back in. are you a yota joint at the tcase end?
 
is it a flange or a ubolt on the diff end?

you can probably just swap a toyota slip onto the diff end of your shaft and get the conversion flange.
is that maybe a conversion joint? or all four caps the same size?
 
pix..
2011-08-13 11.00.08 (1280x960).jpg
2011-08-13 11.00.18 (1280x960).jpg
 
I'll research later, but if they fit my 80 I'll take'm.
 
Stick the joints in the freezer and heat the other part with a torch(or have a bbq and let one end roast on the coals) while you drink beer and get psyched. Then, when the time is right, have another beer.................and order the right ones. :p

:cheers::clap::flipoff2: I kill myself......I kill myself! :hillbilly:
 

Users who are viewing this thread

Back
Top Bottom