Need High Beam help

[ndcruiser]

I found that my High Beams aren't working, and it may have occurred after all my front end work with the winch and bumper. I seem to have everything plugged in, but with the ARB it had some re-wiring done with the extra little lights in it.

Do they have any connections that run near or plug into any of the running lights/fog lights?

I checked, and the fuses are fine.

Thoughts?

 

[LonghornCruiser]

Do your daytime driving lights work? They should be the a dimmed down version of your high beams.

 

[ndcruiser]

Ahh. Come to think of it, they don't.

Want to be sure its not something I did when doing front end work before I have the dealer look at it.

Am I missing something really obvious?

 

[Augie]

Check your ground cables. Your headlight should have separate grounding location on each side. That is on most car I have seen anyway. Have not looked in the headlight wiring manual yet.

 

[1loudLX]

Check to make sure your daytime running light relay is properly connected. On my LX its by the airbox but i dont know where it is on the LC.

Also check the fuses for the two high beams.