My new 80 project... (1 Viewer)
- Thread starter mjl132
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #163
The condenser is on and all is put together like it should be. The drier is a bitch to put on. The lines are situated so that when you put the lines on there is no space to tighten them. It is tough. I'm going to get it vacuumed down and charged tomorrow morning by a pro. Hopefully I'll have AC tomorrow.
+1, hope you get it all sorted out. It's gotta be rough without AC these past few days. I'd be keeping that Yeti in there loaded with water and gatorade
Or just do like my buddy Marco did and turn an EdgeStar into a custom Jockey Box. His didn't really so much "work"... but the concept is sound I would think.
Eric M needs one of these to bring on trail rides:
Can Somebody Measure their Edgestar? - Rising Sun Member Forums
That, and designing x-ray equipment for a living has its perks
. I can't imagine any doctor letting you do that. Maybe a veterinarian would...Now back to your regularly scheduled thread... sorry for the threadjack.
xodeuce said:That, and designing x-ray equipment for a living has its perks
Now back to your regularly scheduled thread... sorry for the threadjack.
I was wondering how he was going to X-ray it...aerospace Industry was my first guess, we have flight controls xray inspected
- Thread starter
- #175
Well so far so good for the most part. I have noticed that the AC cuts out at a light occasionally and this does have me concerned. I don't believe it's an overheating issue because it is immediately upon stopping and even on a cooler rainy day on a flat surface.
I think it is the pressure goes too high and trips the high pressure switch and it cuts off. When they charged it I saw it go over 1.9 lbs on the Robinair monitor and it should have 1.8 or so. So I think it is overcharged and this is leading the pressures to go too high a little bit and cut out. Does this sound pretty plausible?
I'm going to follow EPA guidelines and bleed the system for about 8-10 seconds and watch the sight glass. It is supposed to show some bubbles for a few seconds after it is shut off. Right now there are no bubbles in the glass and it is running clear and strong as well.
Any thoughts?
I think it is the pressure goes too high and trips the high pressure switch and it cuts off. When they charged it I saw it go over 1.9 lbs on the Robinair monitor and it should have 1.8 or so. So I think it is overcharged and this is leading the pressures to go too high a little bit and cut out. Does this sound pretty plausible?
I'm going to follow EPA guidelines and bleed the system for about 8-10 seconds and watch the sight glass. It is supposed to show some bubbles for a few seconds after it is shut off. Right now there are no bubbles in the glass and it is running clear and strong as well.
Any thoughts?
justbecause
perpetually lost.
LMAO! they paid more for the CD player than for the lockers!
ClankBang
Internet Excogitator
And $600 worth of gold!
Mine has the gold package too.
No way I would have paid for those gold emblems. I would have told them to take them off and just leave blanks!
Mine has the gold package too.
No way I would have paid for those gold emblems. I would have told them to take them off and just leave blanks!