BamaHeel
Intergalactic Champion
Wish I saw the post above to self censor like that and sorry to hijack this thread to Lowe Toyota. Back to Keith's 100 build.
My 100 project
- Thread starter xodeuce
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
justbecause
perpetually lost.
- Thread starter
- #23
Instant virtual lift. A none banana project was made nominally more complicated by a bent PS front running board bracket, resulting in the need for a pry bar. Other than that, easy peasy.
Man, can of worms open and shut that quickly. I missed it entirely.
Man, can of worms open and shut that quickly. I missed it entirely.
Blackdog
"Y'all smell that?"
Can 'o worms
Man, can of worms open and shut that quickly. I missed it entirely.[/QUOTE]
Just an off color comment about Zack in a Kilt.
Just funny in the state of mind I was in at the moment.
Hijack Complete
Man, can of worms open and shut that quickly. I missed it entirely.[/QUOTE]
Just an off color comment about Zack in a Kilt.
Just funny in the state of mind I was in at the moment.
Hijack Complete
I can still see it. I thought it was funny, not too off color.
BamaHeel
Intergalactic Champion
Nice I bet you are enjoying 100 ownership
Not for a H55F.
ClankBang
Internet Excogitator
True; I think his add says most items.
werd
SILVER Star
Nice looking hundy. If you're changing the water pump might as well change the timing belt too. Here's a nice write-up.gIfHw
Last edited:
- Thread starter
- #31
Fortunately the water pump and timing belt were done at 88k, so I should be good for a while on that one.
Need to do brake pads, and probably a fluid flush, and band the CV boots. Also kinda thinking it's a little low now that I got the 33's on there, thinking about doing rear springs to lift it just a touch, or maybe the 30mm spacers.
justbecause
perpetually lost.
I have stock rear 80 springs, I know there is some cross over where factory springs from one vehicle can lift another. I dont know if thats the case going 80 to 100.
Clarence is hoarding rear 30MM spacers too, you might want to check with him.
BamaHeel
Intergalactic Champion
He has a set he got from me I know.
ClankBang
Internet Excogitator
Not the 30s
I think the ones you gave me are 5s.
I do have two sets of 30s and the set 5s.
Brad has his name on one set of 30s.
One thing to think about is body lift.
I usually don't like body lifts but a one inch would be good because it will keep your driveline the same but give you more tired clearance.
If i mod my 100 I will be starting with 1 to 1.5 suspension and a 1 inch body.
Do the body now so the bumpers and sliders will line up.
I think the ones you gave me are 5s.
I do have two sets of 30s and the set 5s.
Brad has his name on one set of 30s.
One thing to think about is body lift.
I usually don't like body lifts but a one inch would be good because it will keep your driveline the same but give you more tired clearance.
If i mod my 100 I will be starting with 1 to 1.5 suspension and a 1 inch body.
Do the body now so the bumpers and sliders will line up.