Max Height Rear Coil Spacer? (1 Viewer)

[GTV]

I currently have 30mm Ironman spacers on top of the original rear coils in my 2007 AHC equipped LC. I also have a pair of 5mm OME spacers in stock that I’m thinking about throwing on top for sh!ts and gigs. Can’t hurt, right? Yes, I monitor my pressures… Anyway, as my weight continues to climb it makes me wonder what is the max height spacer that works back there… I see there are 2”/50mm spacers marketed for the 80 series available, any reason why they wouldn’t work on our 100’s? Is coil bind a concern? Would they fall out under full flex? Anything else I should take into account?

 

[JunkCrzr89]

The 2-inchers will work. Definitely won’t fall out - there’s not enough suspension travel to dump them.

 

[GTV]

The 2-inchers will work. Definitely won’t fall out - there’s not enough suspension travel to dump them.

What is the limiting factor? The AHC rams/shocks?

 

[jtb517]

What is the limiting factor? The AHC rams/shocks?

And the sway bar

 

[JunkCrzr89]

What is the limiting factor? The AHC rams/shocks?

The shocks (or whatever TF those AHC things are called) reach max extension multiple inches shorter than coil spring length.

 

[JunkCrzr89]

And the sway bar

Na, you can completely ditch the swaybar and the coils still won’t fall out.

 

[jtb517]

Na, you can completely ditch the swaybar and the coils still won’t fall out.

Yea, if sway has been removed then shock is limiting factor.

 

[AlpineAccess]

Skies the limit

 

[Eyedaho]

Skies the limit

*I think they're junk, but it seemed appropriate!

 

[JunkCrzr89]

Yea, if sway has been removed then shock is limiting factor.

Shock is the limiting factor even with swaybar installed.