Looking for a little help tomorrow. The hood and fender are back from paint tomorrow for the 1999 Blue 100 series. I need a second set of hands to set the hood on or any secrets on how to install a hood.
Done
1. Remove core support bolt - bent - may need to be cut off - done
2. Remove passenger fender - done
3. Pick up hood and fender - done
4. Continue to pull on core support to straighten - done, still needs tweaking
To do
1. Remove hood - Done
2. Install grill support - Done
3. Paint driver side fender if the temp gets high enough - not warm enough
4. Install fender - Done
5. Install hood - Friends helping on Friday, 1/22 - Done
6. Install lower valence - Done
7. Install grill - Done
8. Install lights and corner lights - Done
9. Install bumper cover - will be painted later - Done
White - 2000
1. Install rear rotors and new rear brake pads - Done - stopped the pulsating - the calipers were sticking enough to burn the rotors and that cause the pulsating. - Done
Done
1. Remove core support bolt - bent - may need to be cut off - done
2. Remove passenger fender - done
3. Pick up hood and fender - done
4. Continue to pull on core support to straighten - done, still needs tweaking
To do
1. Remove hood - Done
2. Install grill support - Done
3. Paint driver side fender if the temp gets high enough - not warm enough
4. Install fender - Done
5. Install hood - Friends helping on Friday, 1/22 - Done
6. Install lower valence - Done
7. Install grill - Done
8. Install lights and corner lights - Done
9. Install bumper cover - will be painted later - Done
White - 2000
1. Install rear rotors and new rear brake pads - Done - stopped the pulsating - the calipers were sticking enough to burn the rotors and that cause the pulsating. - Done
Last edited: