M416 in Illinois for sale

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 28, 2010
Threads
1
Messages
5
Location
no. central Illinois
For sale is my 1967 Stevens M416 1/4 ton Jeep trailer. The trailer has been disassembled and every part was sand blasted. Then all holes were repaired by welding or welded patch. The trailer was then painted with two coats of red Rustoluem primer and then two coats of Rustoleum black. The trailer was then re-assembled using replacement grade 6 hardware. The original taillights were replaced with 12 volt trailer light (running, brake, turn signal) and re-wired with a four pin connector.

Left-Side.jpg


The original lights and parking brake have been removed but are included with the sale. I will include four 5.5x5 deep dish spoker wheels (correct wheel pattern size)that have also been media blasted and primed. I will also include a clevis hitch with a 2 inch attaching shaft. This trailer was bought and restored to accompany my black Wrangler Unlimited but I have since sold the Wrangler and no longer need the trailer. Asking $1,500.00 cash as the only work needed is either a clear enamel coat or final paint color. I am willing to deliver at 30 cents per mile to the lower 48

All pictures can be seen here:

https://picasaweb.google.com/BudontheRoad/JeepTrailer?authkey=Gv1sRgCNfu8If3t5nQDg#[/img]
 
I probably should have added, will also trade for firearms. I like 1911s and pistol caliber lever guns but will consider anything.

My wife pointed out that I probably would spend the money on "more stupid guns" and as usual, she is right.
 
An acquaintenance is headed west down I-90 the weekend after July 4th and can deliver the trailer for $150 anywhere along that route all the way to northern California and then to southern California.

I will pay the $150.00 or reduce the price of the trailer in that amount
 
The best I have been offered is $1000 so the girst offer over $1,000.00 wins
 
Nope, trailer is long gone. My apologies for not ending the thread
 

Users who are viewing this thread

Back
Top Bottom