LX470 - winding up the torsion bars
- Thread starter Saltiga1
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
First, welcome to 'Mud! 
Second, read the 100 series FAQ, which is stickied at the top of the 100 series tech section. In there, you'll find this:
https://forum.ih8mud.com/100-series-cruisers/491948-those-torsion-bar-questions.html
There is a ton of great info in the FAQ, and even more knowledge can be found if you use the forum search function. Read, learn, enjoy!
Second, read the 100 series FAQ, which is stickied at the top of the 100 series tech section. In there, you'll find this:
https://forum.ih8mud.com/100-series-cruisers/491948-those-torsion-bar-questions.html
There is a ton of great info in the FAQ, and even more knowledge can be found if you use the forum search function. Read, learn, enjoy!
Keep in mind, he'll have AHC with it being a 2006 LX so a t-bar lift will just be counteracted by the AHC system. IIRC, there is an AHC 'lift' that relocates the sensors to change the neutral position.
Ah, saw the thread title and just assumed torsion bars. :whoops:
For AHC, there should be height adjustment sensors at all 4 corners IIRC. You'd need to adjust the front two to reduce the rake and get the truck to sit level. Search for more info on this, as I have a traditional suspension setup and could be wrong.
For AHC, there should be height adjustment sensors at all 4 corners IIRC. You'd need to adjust the front two to reduce the rake and get the truck to sit level. Search for more info on this, as I have a traditional suspension setup and could be wrong.