LX 570 with EVO Corse wheels?

[Broncobroke]

Stock. Just AHC. No senser lift. No rubbing with that tire size. Thanks

 

[LoamRover]

Stock. Just AHC. No senser lift. No rubbing with that tire size. Thanks

Awesome, thanks a bunch!

 

[BINKYMOBIL]

Hi, I am about to purchase the dakarzero 17x8 40mm offset wheels for my 2019 lx570.
My question is, will these wheels clear my spindles if I get them gusseted with the TC spindle gusset kit?
Does anyone have these wheels with the TC spindle gussets on a lx570 that can provide some photos?
Also what tire size will clear them if installed?

Thanks in advance

 

[MinnesotaLX]

Here’s my contribution. Standard spec 18x8.5 et45 from Mainline.

Went with what seems to be very uncommon silver (to go with the chrome trim), pics don’t do the finish justice- looks nearly white in photos, very bright silver with large metallic flakes in person. Bright but I love the look.

Tires are Toyo AT3 in LT285/65/18 (E). I’m at about 35 psi now, which is too low- but they’re very comfy and very quiet on the highway.

High mode:
View attachment 2946062

Normal mode:
View attachment 2946063

This looks great. I'm going to look into getting these wheels for my LX.

 

[paulunm]

This looks great. I'm going to look into getting these wheels for my LX.

If I were you I'd figure out a way to get these shipped to you, this is an insane deal- then just have them refinished.

For Sale - Evo Corse Dakarzero wheels-SF Bay Area

forum.ih8mud.com

No affiliation

 

[MinnesotaLX]

If I were you I'd figure out a way to get these shipped to you, this is an insane deal- then just have them refinished.

For Sale - Evo Corse Dakarzero wheels-SF Bay Area

forum.ih8mud.com

No affiliation

Appreciate the heads up. But having looked at every wheel on the Internet and researching this for 2 months, I decided I liked your silver Evo Corse wheels, so that's what I ordered this morning. The listing from the seller is for black wheels. While I know black is the trend, I'm copying your silver wheel selection!

 

[paulunm]

Appreciate the heads up. But having looked at every wheel on the Internet and researching this for 2 months, I decided I liked your silver Evo Corse wheels, so that's what I ordered this morning. The listing from the seller is for black wheels. While I know black is the trend, I'm copying your silver wheel selection!

Can’t say I blame you! Post pics when you get them installed!

 

[BobK1]

Here is my 70k mile new-to-me 2019 LX with the 8.5x18 ET45 anthracite wheels wrapped in Falken Wildpeak AT4W SL 275/65R18. Not the typical size, I know. I wanted something smaller than the 21’s but still near stock diameter for commuting and good snow traction. I couldn’t be happier with how they fit.

I’m surprised at how harsh the ride is in this truck over "around town" bumps. Going from 21 down to 18 definitely softened the peaks, but either the springs are too stiff and/or the damping is off even in Comfort mode. Something to work on when my CPO is up.

Also below is a GrabCAD link to the 3D printed center caps seen in the picture. Feel free to download and print or modify yourself. I'm toying with the brand Black11s for different automotive related stuff. It does fit on the front too, but I need to print a couple more.
Center Cap Download

Snow day in NH,
Bob K.

 

[MastiffDad14]

Here is my 70k mile new-to-me 2019 LX with the 8.5x18 ET45 anthracite wheels wrapped in Falken Wildpeak AT4W SL 275/65R18. Not the typical size, I know. I wanted something smaller than the 21’s but still near stock diameter for commuting and good snow traction. I couldn’t be happier with how they fit.

I’m surprised at how harsh the ride is in this truck over "around town" bumps. Going from 21 down to 18 definitely softened the peaks, but either the springs are too stiff and/or the damping is off even in Comfort mode. Something to work on when my CPO is up.

Also below is a GrabCAD link to the 3D printed center caps seen in the picture. Feel free to download and print or modify yourself. I'm toying with the brand Black11s for different automotive related stuff. It does fit on the front too, but I need to print a couple more.
Center Cap Download

Snow day in NH,
Bob K.

View attachment 3829276

View attachment 3829277

View attachment 3829278

View attachment 3829280

View attachment 3829281

The wheels look great! I’m ready to pull the trigger on a set for ours too. Did you ever figure out the overly stiff suspension issue?

 

[Bhebert449]

What is the best way to remove the stickers?

 

[paulunm]

What is the best way to remove the stickers?

I just peeled them off with my fingers/finger nails. Not worth using an adhesive remover wheel IMO.

Use a little goo gone to get residual adhesive off. Easy.

 

[No15]

I've emailed mainlineoverland 4 or 5 times about these wheels and they never answer. Its to bad because I really like these. Might order from Italy if I can figure out the tariff.