Looking for winch install instructiuons for the old Slee 80 front bumper

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 4, 2004
Threads
122
Messages
927
Location
Spokane WA, USA
I have ordered a Titan TW12 with synthetic rope and can't find my front bumper instructions. And I don't recall whether they had any winch instructions anyway. Slee Offroad doesn't show those old instructions, just the ones for the new bumper (and it does include winch instructions).

Can anyone point me to a How To thread or other links that will help me do this painlessly? I have looked through all the pages of the TW12 Group Buy thread and didn't see anything about the Slee bumper specifically.

If I recall correctly, the bumper has to come off and the entire winch and bumper assembly then has to be lifted back up onto the frame. Any hints?

Is there plenty of room for the solenoid box or do I need to relocate it, and if so, where is the best spot?

Does the winch bolt directly to the front inside wall of the bumper, or is there a winch plate I need to buy?

I'm assuming I will have to reclock the motor to get the terminals where I can see them.

This will be my first winch, so I am a little bit clueless.....

Here is my bumper:

LX450-028.JPG


Thanks for any help.

John Davies
Spokane WA
 
Last edited:
It is probably like any other winch installation.
1. Bolt in winch. Make sure that the cable spools out from the bottom of the drum
2. Pull cable through slot it bumper
3. Bolt on fair lead or hawse.
4. Wire it up.
5. Done
6. Step 6
 

Users who are viewing this thread

Back
Top Bottom