Added one quart of Valvoline Dex/Merc Transmission Fluid
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Sorry @bpassmore, not yet. Just getting the pictures from moving it last night uploaded.Already back in?
Wow
The metal looks punctured.
Guys thank you. SeriouslyWe have the transmission and transfer case out.
The front 3" of the bell housing was sheared off. The bottom flange of the transmission has a 3" section broke from the housing. The pan is holding it on.
We are done until the parts come in Tuesday or Wednesday
Thanks so much to the following folks so far:
@2fpower for the replacement transmission
@cjmoon for the use of his garage and his time.
@OverlandDad for his time
@Robkc for his time
Yes torn open 1/4” wise 1.5” long or so. We can throw some tape over it but carpet will need to come up and floor beat out at a latter time.The metal looks punctured.
We ordered from Olathe Toyota. Most parts will be in on Tuesday. Looks like one hose may not be in until Wed.Just now seeing this! I'm guessing you guys got parts at Olathe Toyota, but if you got anything from Molle, I work about a 1/2 mile from them and can pickup parts and bring to @cjmoon 's house, if it makes anything more convenient for anyone. Let me know if you need more hands Wednesday or Thursday nights. My technical abilities are near zero on transmission work, but my hands and back can be available if needed. Love our TAC family!
Let’s plan on 7 Wednesday and Thursday to see where we get. I’ll solder the rear o2 harness that was smashed and cut by the drive shaft before then. We can pop in new seals and rear main and get the trans and transfer case bolted back together Wednesday. Some of that is heavy lifting.