SOLD Late 40 Birfs, SJ CA

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 21, 2019
Threads
18
Messages
215
Location
San Jose
Vehicle Model
  1. 40 Series
Pair of OEM Birfield shafts. They were bought as spares from BTB products as restored original. I never ended up needing them. These will fit 75-80 land cruiser 40/55/60 series.
Toyota OEM #43405-60014
Asking $250 for the pair plus shipping
PXL_20250509_203914054.jpg
PXL_20250509_203928162.jpg
PXL_20250509_203934827.jpg
 
your year range is off
are these the long birfs for 76-78?
79+ were all the same
 
Those dates were copied over from the BTB link. They were for a factory disc front axle.

the link is wrong

disc axles were US spec from 1976 and up
1976-78 used a long birf which is specific to 76-78
1979 - 1990 all Landcruisers and mini trucks 1979-1985 used the same birf
 
$200 takes the set.
FWIW I measured the birf length from the inside ball face to the end of the spline and got 177mm, not sure where that puts these in terms of the short vs long category.

PXL_20250605_165318499.jpg
 

Users who are viewing this thread

Back
Top Bottom