Subterranean Nik
SILVER Star
- Vehicle Model
- 40 Series
Hello all,
1967 F135 engine for sale - $1,800.
Prefer local pickup, or potential to deliver within a few hours.
Pulled this engine out to swap in a 2F ~November 2020. Was running when pulled (and was only swapped for bigger drivetrain upgrade project - 2F, H42, Orion, PS) that I performed on my 1973 FJ40. Unfortunately, no compression numbers prior to pulling. All spins freely. No smoking at time of swap. Including all components seen in picture (of 1F) - manifolds, bellhousing, starter, clutch, flywheel, carb if interested, etc...
Not wanting to part out at this time. Maybe in the future. Pretty well a turnkey engine (will need an alternator - used for my other set up).
I ran this engine from 1998 to 2020 (22yrs). I have all receipts for money spent during this time frame.
Some info of note:
Engine was rebuilt in 2003 at a shop in AZ. Block number F 237083.
Pistons - RY2535 .020, Rod bearings .010, Main bearings .020
Bit irrelevant due to age and lack of mileage records, but for what it's worth this truck was my AZ daily driver 2003 and 2004, weekend truck 2005 in Montana, weekend truck 2006 in Utah, and weekend/trail truck for time in TN 2007 - 2020. Point being, rough number would be 100,000 miles on rebuild.
For anyone serious in the engine, can provide some offroad videos of the engine running - mostly at various GSMTRs and other trail rides near Knoxville, TN.
Below pics. Thanks for looking.
Pic as stowed in garage since pulled.
1967 F135 engine for sale - $1,800.
Prefer local pickup, or potential to deliver within a few hours.
Pulled this engine out to swap in a 2F ~November 2020. Was running when pulled (and was only swapped for bigger drivetrain upgrade project - 2F, H42, Orion, PS) that I performed on my 1973 FJ40. Unfortunately, no compression numbers prior to pulling. All spins freely. No smoking at time of swap. Including all components seen in picture (of 1F) - manifolds, bellhousing, starter, clutch, flywheel, carb if interested, etc...
Not wanting to part out at this time. Maybe in the future. Pretty well a turnkey engine (will need an alternator - used for my other set up).
I ran this engine from 1998 to 2020 (22yrs). I have all receipts for money spent during this time frame.
Some info of note:
Engine was rebuilt in 2003 at a shop in AZ. Block number F 237083.
Pistons - RY2535 .020, Rod bearings .010, Main bearings .020
Bit irrelevant due to age and lack of mileage records, but for what it's worth this truck was my AZ daily driver 2003 and 2004, weekend truck 2005 in Montana, weekend truck 2006 in Utah, and weekend/trail truck for time in TN 2007 - 2020. Point being, rough number would be 100,000 miles on rebuild.
For anyone serious in the engine, can provide some offroad videos of the engine running - mostly at various GSMTRs and other trail rides near Knoxville, TN.
Below pics. Thanks for looking.
Pic as stowed in garage since pulled.
