KDSS issue with icon coilovers help please (1 Viewer)

[landcruiseraddict]

I hope someone can help me, I have a 2010 lc and had icon coilovers installed today but am having the leaning problem do to the shop not resetting the kdss system. Is there a way for me to do that after the install or did it need to happen before? Thanks in advace for your help and sorry for posting this a few times

 

[Tucan viajero]

I guess this is exactly what you need:


http://www.lcool.org/technical/200_series/KDSS_Balance.pdf


BTW, actually it is a lot easier than it seems...

 

[OsoCruiser]

Yes, as Tucan viajero said it's very easy. On mine the stabilizer control valve protector has access holes and does not need to be removed.

 

[landcruiseraddict]

Yes, as Tucan viajero said it's very easy. On mine the stabilizer control valve protector has access holes and does not need to be removed.

Thanks for all the help, it worked perfectly

 

[JBHorne]

After all is said and done, MAKE SURE YOU check the KDSS valve's tightness! Very dangerous if not tight...

 

[landcruiseraddict]

After all is said and done, MAKE SURE YOU check the KDSS valve's tightness! Very dangerous if not tight...

Will do thanks

 

[landcruiseraddict]

Will do thanks

Do you think I can fit Nitto Trail Grappler MT 295/70/R18 's on it I know most are running a 285 Nitto but it seems like I have a Ton of Room on the stock Michelins which I know are like a 31.5