inchworm dual transfercase gear ratio

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 10, 2024
Threads
5
Messages
25
Location
Williams lake bc
i recently bought a brand new 2008 inchworm transfercase that has been sitting in storage all its life and i cant figure out the gear ratios, in high rear. low front in is 2.3 to 1,
but in low rear. high front it is 4.7 to one which i know is proper but when i do low both it is 9.5 to one im not sure if im missing a gear ratio as it also does 7 to one and anything i find on the internet says if it has 9 to one it shouldn't have 2.3 to one.
 
is this left drop or right? chain drive rear or gear?

20241123_152319.jpg
 
then it should be a 2.28 x 4.7
i know there are some 4.0 gear sets out there
but math is (2.28x4.7) 10.7 double low
(2.28 x 4.0) 9.12
 
then it should be a 2.28 x 4.7
i know there are some 4.0 gear sets out there
but math is (2.28x4.7) 10.7 double low
(2.28 x 4.0) 9.12
oh i see i did the math wrong thank you for your help i misunderstood how to do gear ratios.
 

Users who are viewing this thread

Back
Top Bottom