transfercase

i recently bought a brand new 2008 inchworm transfercase that has been sitting in storage all its life and i cant figure out the gear ratios, in high rear. low front in is 2.3 to 1, but in low rear. high front it is 4.7 to one which i know is proper but when i do low both it is 9.5 to one im not...

2012 Lexus GX460 Transfer Case Part Out VF4BM 175k on it The planetary gear set failed on my transfer case (was on highway, never offroaded this unit) but the remaining internals look good. Let me know if you are looking for anything. -Actuator motor -Forks -Chain -Gears -Case/Housing

Hi everyone. I’m in need of a high low shift fork for my transfercase. Mine is pretty worn down on the sides. I’m located in central California but I can pay for shipping. Attached is a pic for reference. Thank you in advance.

Any ideas on where I can get some armor? I have searched a few up and found promising leads out of Australia, but wondering if any here in the states? Maybe I just need to have some fabbed up by a shop here? Any way just looking for some leads to help close this out on my list of TO-Dos!

Hello, I'll be pulling 1FZFE and Trans end of next month and wanted to get some feelers out there once its pulled for the LS conversion. 377k miles Original Engine and Trans. Im the 2nd owner of the truck and I have years of records I can send with the buyer. In the last year I replaced all...

I have a 4 speed trans from a 1984. Bought the trans/transfer combo but don't need the trans. Turns by hand and I can get additional photos of the inside. $350 plus shipping cost. (Runs around $200) Thanks.

New Never installed part time spool for 90-07 80/100 transfercases. Was originally purchased from CruiserTeq. $500 shipped to lower 48. Pm if interested.

Bought with a transmission, said to have 137k miles. located in Delaware Ohio. tested center diff lock actuator works good. viscous coupling feels good when turning rear/front outputs. does not include chain. $350, can ship but may take a week or more before i can get it boxed up and sent.

25.00 plus shipping.

I’m pulling the trans and tcase as a unit from my 96 landcruiser. 1FZ and A343, usual spec. All the bolts are out, all connectors disconnected, followed the FSM directions. The trans absolutely refuses to separate from the motor. Pulling it from the crossmember mount to the frame with a come...

Hi, looking for this switch/indicator for a vacuum transfer case. I believe it is the front drive indicator light switch. Looks like they are not available on SOR.

I can shift the transfer case high neutral low easily. But nothing happens when it's on neutral or low. The SUV doesn't move. When I shift to high, it moves. My parents have been driving this way for about 10 years. I planned on fixing this issue. Give me some ideas! Tomorrow I plan on changing...

I need a fj60 TC. Thanks all.

It has 267k miles on it and was a good runner when I removed it. We can arrange delivery or meeting you half way if you are not more than 100 miles from me for extra cash. $200 OBO plus shipping

Have what is probably a stupid question for all of you out there, but you don't know what you don't know. Yesterday during the great Dallas blizzard of 2021 I was in some ice and snow trying to make it back home and I hit the center diff lock button stupidly right before making a left turn and...

Hi folks, My brother-in-law bought an LX470 with the 4WD "removed" and after checking it they had only removed the auxiliary bar and removed the low gears. But after inspection, notice that the center differential shims were destroyed. Will anyone know where I can get them? or fabrication...

Hey guys I am after a later 60/62 series transfer case must be the 38 mm idler. Let me know if some one has one for sale. Thanks

Does anyone know if a Transfer case out of an Auto 62 can be swapped to an H55F? My main concern is the space and compatibility of the vacume pump to the 75.My truck is a 1987 BJ75 Troopy.Reason for swap is lower gears and roller bearings. Thanx

Having done this in the past I see no reason to remove the t-case for the install. I found it easier and more room on the 100/LX470 series than the 80 series. I put the AHC in High and drove it up on car ramps. Looking back maybe a little too high overall with a lot of reaching. Should not...

LOOKS LIKE I'LL BE KEEPING THE T-CASE FOR THIS WHEELIN' SEASON. THE ADAPTER AND MOUNT WILL BE POSTED SEPARATELY. Orion 4:1 Transfer Case with Downey 700R4 Adapter and accessories. This unit has less than 4,000 miles on it. I prefer to sell this as a complete unit rather than piece it out...