IBS Dual Battery System

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 9, 2009
Threads
10
Messages
142
Location
Pennsylvania
I just purchased the IBS dual battery system. I installed Slee's upgraded primary and secondary battery tray and the installed was very easy. I put in Northstar's AGM 31P and 35 battery's. I will post pictures when I get everything wired up.

My question is:

1. What have other done with the placement of the control box in the cab and were did you mount it?

Photos would be great..

Thanks,
Keefer
 
Last edited:
I have the same system. It's a great setup. Ran it in my 100 series for 5 years. Here is where I mounted it in my 200. Sat in the cab for a while trying to decide where to put the control box. I ended up taking some adhesive and putting the bracket down on the right side of the console

2-jpg.1201545
 
I have the same system. It's a great setup. Ran it in my 100 series for 5 years. Here is where I mounted it in my 200. Sat in the cab for a while trying to decide where to put the control box. I ended up taking some adhesive and putting the bracket down on the right side of the console

2-jpg.1201545
Romer,

Thank you for the photo. I have sat in the LC and also looked at where to place it. Difficult decision.. I am looking at putting it on the panel on the right side of the steering wheel. The place where the cutouts are for additional rocker switches. It fits there like a glove. Like it was meant to go there. It is up and out of the way but can still be easily seen.

Keefer
 
That is where my locker switch is and compressor switch. If you ever want to go for lockers or anything else, you will need those switch spaces.
dsc00903-jpg.1210319
 
That is where my locker switch is and compressor switch. If you ever want to go for lockers or anything else, you will need those switch spaces.
dsc00903-jpg.1210319
Romer,

That is the exact location I am talking about. I really like your set up.. Looks great!

I also have an Spod system to install. I also purchased a dual compressor mount (From Slee) and will be installing that as well.

Thanks,
Keefer
 
I installed mine here. It's out of the way, out of sight and keeps me from obsessing over where the green lights are.

image.jpeg


Compressor switch.

image.jpeg
 
Last edited:

Users who are viewing this thread

Back
Top Bottom