I am interested in the Pre-2003 version
I Made the Perfect Center Diff Lock Switch Cover (2 Viewers)
- Thread starter AtoyotA
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #42
my bad - i designed the pre-2003 version in cad whenever @CataclysmSX and @Exiled expressed interest, but i never could get the edges to print without slight imperfections so i gave up. i will adjust the settings and try printing again this weekend and see if i can get the listing up.
Exiled
SILVER Star
I would also be interested in the pre-03 version!
- Thread starter
- #44
after countless hours of printing, editing the cad design, and printing again, i finally have a CDL button cover for the 1998-2002 models!! i have decided to charge a little more for this one bc it has 16 neodymium magnets (instead of 8), which i felt was necessary since i used a smaller magnet size in order to keep this thing as close to the size of the hazard lights button as possible.
being that i have to embed 16 tiny magnets for each set, without messing up the polarity, these are kind of a pain to make lol. BUT! i currently have 2 separate listings for slightly blemished prints that will work just as well, but my OCD prevents me from selling for full price - for the blemished ones i will sell at the $38 i advertised for the '03-'07 set. the blemishes are purely aesthetic.
'98-'02 listing:
'98-'02 BLEMISHED FRONT:
'98-'02 BLEMISHED REAR:
@ClassyJalopy @CataclysmSX @Exiled
being that i have to embed 16 tiny magnets for each set, without messing up the polarity, these are kind of a pain to make lol. BUT! i currently have 2 separate listings for slightly blemished prints that will work just as well, but my OCD prevents me from selling for full price - for the blemished ones i will sell at the $38 i advertised for the '03-'07 set. the blemishes are purely aesthetic.
'98-'02 listing:
100 Series Center Diff Lock Switch Cover (‘98-‘02) | eBay
Fits 1998-2002 models. This center diff lock button guard covers the CDL button and it’s made of 2 parts: the lid and the base. The lid is secured to the base by 16 embedded rare earth magnets, and the base is held onto the dash by the same double-sided adhesive that’s used in cell phones (it’s...
www.ebay.com
'98-'02 BLEMISHED FRONT:
100 Series Center Diff Lock Switch Cover (‘98-‘02) - BLEMISHED FRONT | eBay
The only blemish is the white icon above the “x”. Fits 1998-2002 models. This center diff lock button guard covers the CDL button and it’s made of 2 parts: the lid and the base. The lid is secured to the base by 16 embedded rare earth magnets, and the base is held onto the dash by the same...
www.ebay.com
'98-'02 BLEMISHED REAR:
100 Series Center Diff Lock Switch Cover (‘98-‘02) - BLEMISHED REAR | eBay
The only blemish is on the rear side of the lid. One of the embedded magnets is slightly visible. Fits 1998-2002 models. This center diff lock button guard covers the CDL button and it’s made of 2 parts: the lid and the base. The lid is secured to the base by 16 embedded rare earth magnets, and...
www.ebay.com
@ClassyJalopy @CataclysmSX @Exiled
Last edited:
- Thread starter
- #45
and for anyone who has an '03-'07 who might think the '98-'02 button cover looks better, i cannot make the '03-'07 model look the same... the corners have to be present to create enough space for the larger magnets. if i remove the corners, i would have to make the entire geometry larger or use 16 smaller magnets, which there simply isn't room for ('98-'02 has magnets on top and bottom, '03-'07 has magnets on left and right). @NMwheeler @MechE30
Last edited:
Purchased. Thanks!after countless hours of printing, editing the cad design, and printing again, i finally have a CDL button cover for the 1998-2002 models!! i have decided to charge a little more for this one bc it has 16 neodymium magnets (instead of 8), which i felt was necessary since i used a smaller magnet size in order to keep this thing as close to the size of the hazard lights button as possible.
being that i have to embed 16 tiny magnets for each set, without messing up the polarity, these are kind of a pain to make lol. BUT! i currently have 2 separate listings for slightly blemished prints that will work just as well, but my OCD prevents me from selling for full price - for the blemished ones i will sell at the $38 i advertised for the '03-'07 set. the blemishes are purely aesthetic.
'98-'02 listing:
100 Series Center Diff Lock Switch Cover (‘98-‘02) | eBay
Fits 1998-2002 models. This center diff lock button guard covers the CDL button and it’s made of 2 parts: the lid and the base. The lid is secured to the base by 16 embedded rare earth magnets, and the base is held onto the dash by the same double-sided adhesive that’s used in cell phones (it’s...www.ebay.com
'98-'02 BLEMISHED FRONT:
100 Series Center Diff Lock Switch Cover (‘98-‘02) - BLEMISHED FRONT | eBay
The only blemish is the white icon above the “x”. Fits 1998-2002 models. This center diff lock button guard covers the CDL button and it’s made of 2 parts: the lid and the base. The lid is secured to the base by 16 embedded rare earth magnets, and the base is held onto the dash by the same...www.ebay.com
'98-'02 BLEMISHED REAR:
100 Series Center Diff Lock Switch Cover (‘98-‘02) - BLEMISHED REAR | eBay
The only blemish is on the rear side of the lid. One of the embedded magnets is slightly visible. Fits 1998-2002 models. This center diff lock button guard covers the CDL button and it’s made of 2 parts: the lid and the base. The lid is secured to the base by 16 embedded rare earth magnets, and...www.ebay.com
@ClassyJalopy @CataclysmSX @Exiled
- Thread starter
- #47
got it! will ship it in the next hour or so!!
Exiled
SILVER Star
Ordered! Thank you!!!
Exiled
SILVER Star
This thing is REALLY nice, fits perfectly and the quality of the printing is great. Thank you!!!
